Cleaver Brooks Low Gas Pressure Switch
Cleaver Brooks Low Gas Pressure Switch: Browse our Cleaver Brooks Low Gas Pressure Switches with pictures below. Every part is a genuine Cleaver-Brooks spare, shown with its part number, so you can find the low gas pressure switch you need for your boiler. Contact KBS Industries if you need help finding the right part.
Cleaver-Brooks Low Gas Pressure Switch, 3-21″ WC Honeywell C6097A1012
HWA-C6097A1012

Cleaver-Brooks Ashcroft B-Series, Type 400 Low Gas Pressure Switch, 0”-60” WC
817-05201-000

Cleaver-Brooks Differential Pressure Switch, Low Limit DPDT Manual Reset Trip on Decreasing Pressure, NEMA 4X, 0-30″ WC Range
817-05508-000

Cleaver-Brooks Differential Pressure Switch, Low Limit DPDT Manual Reset Trip on Increasing Pressure, NEMA 4X, 0-30″ WC Range
817-05509-000

Cleaver-Brooks Low Gas Pressure Switch, 1-20″ WC Range, SPDT, Manual Reset Lock Out Pressure Fall, 1/4″ NPT Mount
836-01631-000
Each Cleaver Brooks Low Gas Pressure Switch on this page is a genuine Cleaver-Brooks spare for Cleaver-Brooks boilers. Learn more about the manufacturer at Cleaver-Brooks. You can also browse our related Cleaver Brooks Relief Valve, Cleaver Brooks Warrick Control, Cleaver Brooks Actuator, Feedwater Valve Actuator, Cleaver Brooks Diffuser and Boiler Spare Parts pages.
These switches monitor the gas supply pressure to a burner and shut the burner down when pressure falls below the set point, so the correct range, reset type and connection matter. The parts below cover Honeywell, Ashcroft and Dungs models in different ranges, including manual-reset switches that trip on decreasing or increasing pressure. Check the range, the reset type and the connection on your existing switch, then match it to the part number shown with each picture. If the number on your switch is worn or unclear, contact KBS Industries with the boiler model and the markings you can read, and we will help you identify the right replacement.
When you replace a switch, note whether your old switch resets automatically or needs a manual reset after it trips, and whether it trips when pressure falls or when it rises. The two differential pressure switches on this page show how different that behaviour can be: one trips on decreasing pressure and the other on increasing pressure, so the part number matters more than the general type.
Also note the pressure range in inches of water column, the electrical rating and the pipe connection size before you order. A switch with the wrong range may trip too early or too late, and a switch with the wrong connection will not fit the gas train. Keep the old switch until the new one is fitted, so you can compare the markings side by side. If you are unsure which part matches your burner, send us the boiler make and model, the burner details and a clear photo of the old switch, and we will check it against the parts listed here.
Contact KBS Industries for help finding the right part for your boiler. Tell us the part number, range and type, or browse our related Cleaver Brooks Relief Valve, Cleaver Brooks Warrick Control, Cleaver Brooks Actuator, Feedwater Valve Actuator and Cleaver Brooks Diffuser pages, or browse the full Boiler Spare Parts range.
