Aurora Pump Glands
Aurora Pump Glands: Browse our Aurora Pump Glands below. The list covers 16 genuine Aurora Pump Glands, shown with their part numbers, for Aurora 410 Series and other Aurora pumps. Every part is a genuine Aurora spare — contact KBS Industries if you need help finding the right part.
Aurora 410 Series gland
372-0238-010
Aurora 410 Series gland
372-0225-010
Aurora 410 Series gland
372-0227-010
Aurora 410 Series gland
372-0228-010
Aurora 410 Series gland
372-0065-010
Aurora 410 Series gland
372-7009-010
Aurora pump gland
372-0280-010
Aurora pump seal gland
372-0285-010
Aurora pump gland
372-0287-010
Aurora pump gland
372-0289-010
Aurora pump seal gland
372-0291-010
Aurora pump gland
372-0293-010
Aurora pump gland
372-0150-010
Aurora pump gland
372-7032-010
Aurora pump gland
372-0068-010
Aurora pump packing gland
372-7006-104
Every Aurora Pump Glands listing above shows the part number you need to match the gland to your pump. The gland holds the packing in the stuffing box and, with the swing bolts, sets how tightly the packing presses on the shaft sleeve. A worn or scored gland lets the pump leak and can damage the packing, so check it whenever the pump is repacked.
The first six Aurora Pump Glands on this page are the 410 Series glands, with the seal glands among them. The packing gland 372-7006-104 suits packed pumps. For the full Aurora pump range, start from our Aurora Pump Spare Parts hub. If you are repacking the pump, see our Aurora Pump Packing page and our Aurora Pump Swing Bolt Assemblies page.
What Are Aurora Pump Glands?
A gland is the ring that holds the packing in the stuffing box of an Aurora pump. Aurora Pump Glands press the packing against the shaft sleeve to stop the pumped liquid leaking out along the shaft, while still letting the shaft turn. The gland is held by the swing bolts, which are tightened to set the packing pressure. Seal glands do the same job where the pump is fitted with a mechanical seal.
Glands wear where they rub on the packing and the shaft sleeve, and a scored gland can cut new packing in days. The Aurora Pump Glands on this page are genuine Aurora spares, made to the size Aurora specifies for the pump, so the gland fits the stuffing box and the packing sits square.
When you fit a new gland, clean the stuffing box and check the shaft sleeve for wear first. A worn sleeve will leak no matter how good the gland is. Tighten the swing bolts a little at a time and evenly, so the gland stays square and the packing is pressed evenly all round the sleeve.
How to Choose Aurora Pump Glands
- Match the part number to your pump series and model before you order.
- Check whether your pump is packed or sealed — packed pumps take a packing gland, sealed pumps take a seal gland.
- Check the gland for scoring — a scored gland will cut new packing. See our Aurora Pump Packing page.
- Check the swing bolts too — a bent swing bolt will not hold the gland square. See our Aurora Pump Swing Bolt Assemblies page.
- Use genuine Aurora parts, made to Aurora’s size and material.
- Not sure which of the 16 parts fits your pump? Email sales@kbsindustries.com with your pump model and part number.
Order Aurora Pump Glands from KBS Industries
To order Aurora Pump Glands, email sales@kbsindustries.com with your pump model and part number, or start from our Aurora Pump Spare Parts hub. For related parts, see Aurora Pump Packing, Aurora Pump Swing Bolt Assemblies and Aurora Pump Seal Kits. You can also check the Aurora brand page on the Pentair site.
