Aurora Pump Shafts
Aurora Pump Shafts: Browse our Aurora Pump Shafts with pictures below. Every part is a genuine Aurora spare, shown with its part number, so you can find the shaft you need for your Aurora 410 Series pump. Contact KBS Industries if you need help finding the right part.

Aurora Pump Shaft
728-0121-063

Aurora Pump Shaft
728-0122-063

Aurora Pump Shaft
728-0123-063

Aurora Pump Shaft
756-0692-208

Aurora Pump Shaft
728-4984-063

Aurora Pump Shaft
728-4985-063

Aurora Pump Shaft
728-4987-063
Aurora Pump Shafts: genuine Aurora spares for Aurora 410 Series pumps. Each shaft carries the impeller and connects it to the drive, so a worn or bent shaft can cause vibration, seal trouble and poor performance. Match the part number stamped on your old shaft, and check the shaft sleeve and bearings at the same time. If you are not sure which shaft fits, contact KBS Industries with your pump model, series and partr.
How to Choose the Right Aurora Pump Shafts
To choose the right Aurora Pump Shafts, start with the part number stamped on the shaft you are replacing. The Aurora Pump Shafts on this page are genuine Aurora spares for Aurora 410 Series pumps, and they are not interchangeable. Check the shaft size and length on your existing shaft as well as the part number, and compare them with the pictures above. For the manufacturer’s own information, see Aurora Pump. You can also browse our related Aurora Pump Parts, Aurora Pump Spare Parts and Mechanical Seals pages.
A shaft that looks the same but has a different part number may not fit your pump, so do not guess from the picture alone. If you are unsure, contact KBS Industries with the part number and we will help you confirm the match. If the part number on your old shaft is worn or hard to read, send us a photo of the shaft and the pump nameplate and we will help you match it.
Contact KBS Industries for help finding the right Aurora Pump Shafts for your pump. Tell us the part number, the series of your Aurora pump and your pump model, and we will help you confirm the match before you order. If your pump is out of service, tell us when you contact us and we will help you find a matching spare as quickly as possible. We also stock related Aurora parts — see our Aurora Pump Parts, Aurora Pump Spare Parts and Aurora Pump Shaft Sleeves pages, or browse the full Mechanical Seals
A worn shaft can also damage the parts around it. When you take a pump apart, look at the shaft where the seal and the shaft sleeve sit. If the surface is grooved or scored, a new seal will not hold and the sleeve will wear quickly, so replace the shaft rather than fitting new parts around a damaged one. Check the bearings at the same time, because a worn bearing lets the shaft move and that movement wears the shaft and the seal. Replacing the shaft, the shaft sleeve and the bearings together is often the surest way to put a pump back into service. Our Aurora Pump Shaft Sleeves page lists the matching sleeves, and our Aurora Pump Bearings page lists the matching bearings, so you can order the parts you need in one place. If the shaft is bent, do not try to straighten it. A bent shaft will vibrate, wear the seal and the bearings, and can damage the impeller. Order a new shaft by part number and check the coupling and the motor alignment when you fit it. If you are not sure whether the shaft is bent, roll it on a flat surface or ask us and we will help you check it.
