Tuesday, November 17, 2026

Bell & Gossett Shaft Sleeves

Bell & Gossett Shaft Sleeves: browse our Bell & Gossett Shaft Sleeves below. Every sleeve listed here is a genuine Bell & Gossett spare, shown with its part number, so you can find the sleeve you need for your Bell & Gossett pump. Contact KBS Industries if you need help finding the right part.

Bell & Gossett shaft sleeve 52-239--611-001 — Bell & Gossett Shaft Sleeves

Bell & Gossett Shaft Sleeve
52-239–611-001

Bell & Gossett shaft sleeve 52-329-612-001

Bell & Gossett Shaft Sleeve
52-329-612-001

Bell & Gossett shaft sleeve 52-239-614-001

Bell & Gossett Shaft Sleeve
52-239-614-001

Bell & Gossett shaft sleeve 52-239-615-001

Bell & Gossett Shaft Sleeve
52-239-615-001

Bell & Gossett shaft sleeve 185021LF

Bell & Gossett Shaft Sleeve, Series 80 & 1531, 1.625 in.
185021LF

Bell & Gossett shaft sleeve 185022

Bell & Gossett Shaft Sleeve, Series E-80 & E-1531, 1.625 in.
185022

Bell & Gossett shaft sleeve 185024LF

Bell & Gossett Shaft Sleeve, Series 80, 90 & 1531, 1.250 in.
185024LF

Bell & Gossett shaft sleeve 185025

Bell & Gossett Shaft Sleeve, Series E-80, E-90 & E-1531, 1.250 in.
185025

Bell & Gossett shaft sleeve 185140LF

Bell & Gossett Shaft Sleeve, Series 1510, 1.250 in.
185140LF

Bell & Gossett shaft sleeve 185141

Bell & Gossett Shaft Sleeve, Series E-1510, 1.250 in.
185141

Bell & Gossett shaft sleeve 185142LF

Bell & Gossett Shaft Sleeve, Series 1510, 1.625 in.
185142LF

Bell & Gossett shaft sleeve 185143

Bell & Gossett Shaft Sleeve, Series E-1510, 1.625 in.
185143

Bell & Gossett shaft sleeve 185146

Bell & Gossett Shaft Sleeve, 1.000 x 1.250 x 4.500 in.
185146

Bell & Gossett shaft sleeve 185148

Bell & Gossett Shaft Sleeve
185148

Bell & Gossett shaft sleeve 186023

Bell & Gossett Shaft Sleeve, 1.000 x 1.250 x 4.500 in.
186023

Bell & Gossett shaft sleeve 186943

Bell & Gossett Shaft Sleeve, Series 60, 90 & 1535, 0.500 in.
186943

Bell & Gossett shaft sleeve 186943LF

Bell & Gossett Shaft Sleeve, Series 60, 90 & 1535, 0.500 in.
186943LF

Bell & Gossett shaft sleeve 186944

Bell & Gossett Shaft Sleeve, Series 60, 90 & 1535, 0.750 in.
186944

Bell & Gossett shaft sleeve 186944LF

Bell & Gossett Shaft Sleeve, Series 60, 90 & 1535, 0.750 in.
186944LF

Bell & Gossett shaft sleeve 187202

Bell & Gossett Shaft Sleeve, Series E-1531, E-1532 & E-80, 1.625 in.
187202

Bell & Gossett shaft sleeve AC0601

Bell & Gossett Shaft Sleeve
AC0601

Bell & Gossett shaft sleeve AC0608

Bell & Gossett Shaft Sleeve, Series 1510 8G, 2.000 in.
AC0608

Bell & Gossett shaft sleeve P01772

Bell & Gossett Shaft Sleeve
P01772

Bell & Gossett shaft sleeve P08730

Bell & Gossett Shaft Sleeve
P08730

Bell & Gossett shaft sleeve P5001021

Bell & Gossett Shaft Sleeve, VSX, 2.000 in.
P5001021

Bell & Gossett shaft sleeve P5001079

Bell & Gossett Shaft Sleeve, VSX, 2.500 in.
P5001079

Bell & Gossett shaft sleeve P5001245

Bell & Gossett Shaft Sleeve, VSX, 3.000 in.
P5001245

Bell & Gossett shaft sleeve P5001270

Bell & Gossett Shaft Sleeve, VSX, 3.500 in.
P5001270

Bell & Gossett shaft sleeve P85075

Bell & Gossett Shaft Sleeve, 1.000 x 1.250 x 4.500 in.
P85075

Bell & Gossett shaft sleeve P90457

Bell & Gossett Shaft Sleeve, VSC/VSCS, 2.625 in.
P90457

A shaft sleeve is a thin tube that fits over the pump shaft where the seal rides. On a Bell & Gossett pump the sleeve takes the wear from the seal, so the shaft itself stays smooth and true. When a sleeve scores or wears thin, the seal leaks, and the leak often looks like a seal failure. The part numbers on this page are the numbers Bell & Gossett assigned to each sleeve, so you can match the sleeve you remove with the sleeve you order.

KBS Industries stocks genuine Bell & Gossett Shaft Sleeves for the pump models our customers run every day. Each Bell & Gossett Shaft Sleeve on this page is listed by its part number, so you can check it against the sleeve in your pump or against your pump nameplate before you order. If the number on your old sleeve is worn away, or if you are not sure which of the thirty sleeves fits your pump, send us the pump model and serial number and we will help you confirm the match. We ship Bell & Gossett parts across the United States and support the pumps we sell.

Signs a Bell & Gossett Shaft Sleeve Needs Replacing

A leak at the seal, a groove you can feel with a fingernail, or a sleeve that has worn thin are the usual signs that a Bell & Gossett Shaft Sleeve is worn. Sleeves also fail when the seal runs dry, when grit gets into the seal area, or when corrosion pits the surface. Replacing the sleeve at this stage protects the new seal, because a scored sleeve will damage a new seal quickly. If your pump has started to leak at the seal, check the sleeve before you order seals alone.

How to Choose the Right Bell & Gossett Shaft Sleeves

Start with the part number on the sleeve you are replacing. Bell & Gossett Shaft Sleeves differ in bore, length and size, so a sleeve that looks right can still be the wrong fit. Compare the number, measure the bore and length, and check the sleeve against the shaft and seal before you order. If the sleeve ran with a damaged seal, inspect the seal too, because a failed seal often scores the sleeve.

  • Match the part number on the old sleeve exactly.
  • Measure the bore and length.
  • Check the shaft for scoring under the sleeve.
  • Replace a damaged seal at the same time.
  • Ask KBS Industries to confirm the fit if the number is unreadable.

Bell & Gossett Shaft Sleeves: What Fits Your Pump

Thirty Bell & Gossett Shaft Sleeves are listed on this page, covering the Series 60, 80, 90, 1510, 1531, 1535, VSX and VSC pumps that Bell & Gossett built. The part number tells you which pump and shaft size the sleeve belongs to, so start there and do not guess from size alone. Two sleeves can share a bore and still differ in length, and any of those differences will stop the seal from seating correctly. If you have the pump nameplate, send us the model and serial number with your enquiry. We can then check the sleeve against the factory parts list for that pump and confirm the match before you order.

When a sleeve is replaced, it is good practice to fit a new seal at the same time, because the old seal has run on the worn sleeve and may not seat correctly on the new one. A fresh sleeve with a new seal gives the pump a clean start and protects the shaft from the wear that a scored sleeve causes. KBS Industries can supply the matching Bell & Gossett seals, bearings, shafts and glands for the same pump, so the whole rebuild can be ordered together and fitted in one visit.

Bell & Gossett Shaft Sleeves come in the sizes shown on this page, from 0.500 in. to 3.500 in., and each size fits only the pump series listed with it. Check the series and size on the card before you order, and send us the pump model if the size on your old sleeve is worn away. Bell & Gossett Shaft Sleeves are genuine factory parts, and every sleeve we supply is checked against the part number before it ships.

Bell & Gossett Shaft Sleeves at KBS Industries

KBS Industries supplies Bell & Gossett Shaft Sleeves with the part numbers shown on this page, and our team can help you find the right sleeve for your pump. Call or email us with your pump model, serial number or the part number from your old sleeve, and we will confirm the match before you order. We also stock Bell & Gossett seals, bearings, shafts and glands, so a full rebuild can be ordered in one place. Contact KBS Industries today to check stock of Bell & Gossett Shaft Sleeves and get your pump back in service.

Ordering Bell & Gossett Shaft Sleeves from KBS Industries is simple. Find the part number on this page, then call or email us with the number and your pump model. We will confirm the sleeve fits your pump, check our stock, and give you a delivery time. If you are rebuilding a pump, we can add the matching seal, bearings and shaft to the same order, so everything arrives together and the pump can be rebuilt in one visit. Our team works with Bell & Gossett pumps every day, and we are glad to help you find the right part, even when the number on the old sleeve is hard to read.

Browse More Bell & Gossett Parts

You can find the full range on our Bell & Gossett page, with Bell & Gossett Mechanical Seals – HSC Pump, Bell & Gossett Mechanical Seals – End Suction Pump, Bell & Gossett Seal Replacement Kits, Bell & Gossett Bearings, Bell & Gossett Pump Shafts, Bell & Gossett Glands and Bell & Gossett Gaskets & Accessories. For pump curves, manuals and factory guidance, see the manufacturer’s Bell & Gossett website.