Aurora Pump Swing Bolt Assemblies
Aurora Pump Swing Bolt Assemblies: Browse our Aurora Pump Swing Bolt Assemblies below. The list covers 3 genuine Aurora Pump Swing Bolt Assemblies, shown with their part numbers, for Aurora 410 and 480 Series split-case pumps. Every assembly is a genuine Aurora spare — contact KBS Industries if you need help finding the right part.
304SS swing bolt assembly with gland clamp, washer and brass nut, Power Series 1 & 2
099-0002-644
304SS swing bolt assembly with gland clamp, washer and brass nut, Power Series 3 & 4
099-0014-644
304SS swing bolt assembly with gland clamp, washer and brass nut, Power Series 5 & 6B
099-0015-644
Every Aurora Pump Swing Bolt Assemblies listing above shows the part number you need to match the assembly to your pump. A swing bolt assembly holds the gland on a split-case pump: the 304 stainless steel swing bolt pivots on the gland clamp, and the brass nut draws the gland down onto the packing. A seized or stretched bolt will not hold the gland square, so check the bolt and nut whenever the pump is repacked.
The three assemblies on this page cover Power Series 1 and 2, Power Series 3 and 4, and Power Series 5 and 6B. Each one includes the swing bolt, the gland clamp, the washer and the brass nut. For the full Aurora pump range, start from our Aurora Pump Spare Parts hub. For related parts, see our Aurora Pump Glands, Aurora Pump Lantern Rings and Aurora Pump Packing pages.
What Are Aurora Pump Swing Bolt Assemblies?
A swing bolt assembly is the hinged bolt that holds the gland on an Aurora split-case pump. Aurora Pump Swing Bolt Assemblies are made up of four parts: a 304 stainless steel swing bolt, a gland clamp, a washer and a brass nut. The bolt pivots on the clamp, so the gland can be swung out of the way when the packing is changed, then swung back and drawn down with the nut.
The brass nut and the stainless steel bolt are a matched pair — brass on stainless steel will not seize the way two steel parts can, so the gland can be tightened and loosened again and again. The washer spreads the load of the nut over the gland. All of the Aurora Pump Swing Bolt Assemblies on this page are genuine Aurora spares, made to the size Aurora specifies for the pump.
Swing bolt assemblies are easy to overlook, but they do the work of keeping the gland square on the packing. A bent bolt, a worn clamp or a nut that will not turn freely will make the gland bind, and a bound gland will not seal. When you order a rebuild kit, check the swing bolts too — the 480 Series minor packed repair kits on our Aurora Pump Split Case Rebuild Kits page include four swing bolt assemblies.
How to Choose Aurora Pump Swing Bolt Assemblies
- Match the assembly to your pump’s power series — Power Series 1 and 2 take 099-0002-644, Power Series 3 and 4 take 099-0014-644, Power Series 5 and 6B take 099-0015-644.
- Check the bolt for stretch or a bent shank — a bent bolt will not hold the gland square.
- Check that the brass nut turns freely on the bolt — a seized nut will not tighten the gland.
- Check the gland clamp and washer too — a worn clamp will not hold the bolt.
- Replace the assemblies in sets — if one bolt is worn, the others on the same gland are usually worn too.
- Use genuine Aurora parts, made to Aurora’s size and material.
- Not sure which of the 3 assemblies fits your pump? Email sales@kbsindustries.com with your pump model and part number.
Order Aurora Pump Swing Bolt Assemblies from KBS Industries
To order Aurora Pump Swing Bolt Assemblies, email sales@kbsindustries.com with your pump model and part number, or start from our Aurora Pump Spare Parts hub. For related parts, see Aurora Pump Glands, Aurora Pump Split Case Rebuild Kits and Aurora Pump Packing. You can also check the Aurora brand page on the Pentair site.
