Bell & Gossett Bearings
Bell & Gossett Bearings: browse our Bell & Gossett Bearings below. Every bearing listed here is a genuine Bell & Gossett spare, shown with its part number, so you can find the bearing you need for your Bell & Gossett pump. Contact KBS Industries if you need help finding the right part.
Bell & Gossett Bearing
8050-31660
Bell & Gossett Bearing
52-119-728-001
Bell & Gossett Bearing
P6010989
Bell & Gossett Bearing
P6010252
Bell & Gossett Bearing
P6010102
Bell & Gossett Bearing
P6010145
Bell & Gossett Bearing
P6010879
Bell & Gossett Bearing
P6010203
Bell & Gossett Bearing
P6011338
Bell & Gossett Bearing
P6011235
Bell & Gossett Bearing
P6010184
Bell & Gossett Bearing
P6000288
Bell & Gossett Bearing
P6000004
Bell & Gossett Bearing
P6000100
Bell & Gossett Bearing
P6000267
Bell & Gossett Bearing
P6000290
Bell & Gossett Bearing
P6000266
Bell & Gossett Bearing
P6000289
Bell & Gossett Bearing
P6000005
Bell & Gossett Bearing
P6000101
Bell & Gossett Bearing
P6000019
Bell & Gossett Bearing
P6016149
Bell & Gossett Bearing
P6016153
Bell & Gossett Bearing
P6016127
Bell & Gossett Bearing
P6016145
Bell & Gossett Bearing
P6016155
Bell & Gossett Bearing
P6016150
Bell & Gossett Bearing
186001
Bell & Gossett Bearing
186002
Bell & Gossett Bearing
186571
Bell & Gossett Bearing
186572
A bearing supports the pump shaft and lets it turn smoothly under load. On a Bell & Gossett pump the bearings carry the weight of the shaft and impeller, take the thrust from the pumped liquid, and keep the shaft running true inside the seal and casing. When a bearing wears, the shaft starts to move, the seal leaks, and the pump grows noisy and hot. The part numbers on this page are the numbers Bell & Gossett assigned to each bearing, so you can match the bearing you remove with the bearing you order.
KBS Industries stocks genuine Bell & Gossett Bearings for the pump models our customers run every day. Each Bell & Gossett Bearing on this page is listed by its part number, so you can check it against the bearing in your pump or against your pump nameplate before you order. If the number on your old bearing is worn away, or if you are not sure which of the thirty-one bearings fits your pump, send us the pump model and serial number and we will help you confirm the match. We ship Bell & Gossett parts across the United States and support the pumps we sell.
Signs a Bell & Gossett Bearing Needs Replacing
Grinding or rumbling noise, vibration, a hot bearing housing, or a shaft that moves side to side are the usual signs that a Bell & Gossett Bearing is worn. Bearings also fail when water gets past a worn seal, when grease dries out, or when the pump runs dry. Replacing the bearing at this stage protects the seal and shaft, because a worn bearing lets the shaft wobble and damage the seal quickly. If your pump has started to run rough or hot, check the bearings before you order seals alone.
How to Choose the Right Bell & Gossett Bearings
Start with the part number on the bearing you are replacing. Bell & Gossett Bearings differ in bore, width and load rating, so a bearing that looks right can still be the wrong fit. Compare the number, measure the bore and width, and check the bearing against the shaft and housing before you order. If the bearing ran with a damaged seal, inspect the seal and sleeve too, because water past the seal is a common cause of bearing failure.
- Match the part number on the old bearing exactly.
- Measure the bore and width.
- Check the shaft and housing for wear.
- Replace a damaged seal and sleeve at the same time.
- Ask KBS Industries to confirm the fit if the number is unreadable.
Bell & Gossett Bearings: What Fits Your Pump
Thirty-one Bell & Gossett Bearings are listed on this page, covering the bearing frames that Bell & Gossett built for these pumps. The part number tells you which pump and bearing position the bearing belongs to, so start there and do not guess from size alone. Two bearings can share a bore and still differ in width or load rating, and any of those differences will stop the shaft from running true. If you have the pump nameplate, send us the model and serial number with your enquiry. We can then check the bearing against the factory parts list for that pump and confirm the match before you order.
When a bearing is replaced, it is good practice to fit a new seal at the same time, because the old seal has run on the worn bearing and may not seat correctly once the shaft runs true again. Fresh bearings with a new seal give the pump a quiet start and protect the shaft from the wear that a loose bearing causes. KBS Industries can supply the matching Bell & Gossett seals, sleeves, shafts and glands for the same pump, so the whole rebuild can be ordered together and fitted in one visit.
Bell & Gossett Bearings at KBS Industries
KBS Industries supplies Bell & Gossett Bearings with the part numbers shown on this page, and our team can help you find the right bearing for your pump. Call or email us with your pump model, serial number or the part number from your old bearing, and we will confirm the match before you order. We also stock Bell & Gossett seals, sleeves, shafts and glands, so a full rebuild can be ordered in one place. Contact KBS Industries today to check stock of Bell & Gossett Bearings and get your pump back in service.
Ordering Bell & Gossett Bearings from KBS Industries is simple. Find the part number on this page, then call or email us with the number and your pump model. We will confirm the bearing fits your pump, check our stock, and give you a delivery time. If you are rebuilding a pump, we can add the matching seal, sleeve and shaft to the same order, so everything arrives together and the pump can be rebuilt in one visit. Our team works with Bell & Gossett pumps every day, and we are glad to help you find the right part, even when the number on the old bearing is hard to read.
Browse More Bell & Gossett Parts
You can find the full range on our Bell & Gossett page, with Bell & Gossett Mechanical Seals – HSC Pump, Bell & Gossett Mechanical Seals – End Suction Pump, Bell & Gossett Seal Replacement Kits, Bell & Gossett Shaft Sleeves, Bell & Gossett Pump Shafts, Bell & Gossett Glands and Bell & Gossett Gaskets & Accessories. For pump curves, manuals and factory guidance, see the manufacturer’s Bell & Gossett website.
