Aurora Pump Split Case Rebuild Kits
Aurora Pump Split Case Rebuild Kits: Browse our Aurora Pump Split Case Rebuild Kits below. The list covers 9 genuine Aurora Pump Split Case Rebuild Kits, shown with their part numbers, for Aurora 410 and 480 Series split-case pumps. Every kit is a genuine Aurora spare — contact KBS Industries if you need help finding the right kit for your pump.
410 Series rebuild kit, Power Series 1 — 2×2.5×9, 2×2.5×10, 2×2.5×12
476-0636-644
410 Series rebuild kit, Power Series 2 — 2.5x3x10B, 2.5x3x12, 3x4x10B & C, 4x5x10B, 3x4x14
476-0637-644
410 Series rebuild kit, Power Series 3 — 4x5x11A & C, 4x5x11D, 4x5x15
476-0638-644
410 Series rebuild kit, Power Series 4 — 4x6x18B, 5x6x11A & C, 5x6x15, 5x6x17, 6x8x11, 8x8x11B
476-0639-644
410 Series rebuild kit, Power Series 5 — 6x8x15, 6x8x20, 8x10x12, 8x10x15, 8x10x17, 6x8x18
476-0640-644
480 Series minor packed repair kit, Power Series 2 — 2.5-481-10B, 2.5-483-10B, 3-481-10, 3-483-10, 2.5x3x12
476-0630-644
480 Series minor packed repair kit, Power Series 3 — 4-481-11A & C, 4-483-11A & C, 4-481-11D, 4-483-11D, 4-481-15, 4-483-15, 4-485-15
476-0631-644
480 Series minor packed repair kit, Power Series 4 — 5-481-11B & C, 5-483-11B & C, 5-481-11D, 5-481-15 & 17, 5-483-15 & 17, 6-481-11, 6-483-11, 5-485-15
476-0632-644
480 Series minor packed repair kit, Power Series 5 — 6-481-15, 15B & 15C, 6-483-15, 15B & 15C, 6-481-18B & C, 6-483-18B & C, 6-481-20, 6-483-20, 8-481-12, 8-483-12, 8-481-17B, 8-483-17B, 6-485-16 & 16B, 6-485-17A, 8x10x15
476-0633-644
Every Aurora Pump Split Case Rebuild Kits listing above shows the part number you need to match the kit to your pump. The 410 Series rebuild kits include two mechanical seals, two bronze lead-free shaft sleeves, two bearings, three grease seals, two water slingers, two gland O-rings and case gaskets. The 480 Series minor packed repair kits include 12 packing rings, four swing bolt assemblies, two bearings, three grease seals, two water slingers, two gland O-rings and case gaskets.
Mesco’s 410 Series kits include the shaft sleeves, unlike the factory Aurora kits. Check the power series and pump size against the kit before you order — the wrong kit will not fit. For the full Aurora pump range, start from our Aurora Pump Spare Parts hub. For single parts, see our Aurora Pump Mechanical Seals, Aurora Pump Bearings and Aurora Pump Packing pages.
What Are Aurora Pump Split Case Rebuild Kits?
A split case rebuild kit is a boxed set of the wear parts that are replaced when an Aurora 410 or 480 Series split-case pump is rebuilt. Aurora Pump Split Case Rebuild Kits collect the seals, sleeves, bearings and gaskets for one power series into a single part number, so the pump can be put back together with matched parts in one order.
The 410 Series kits on this page are Viton and silicon carbide rebuild kits. Each one holds two mechanical seals, two bronze lead-free shaft sleeves, two bearings, three grease seals, two water slingers, two gland O-rings and case gaskets. The 480 Series kits are minor packed repair kits: they hold PTFE and graphite packing rings, swing bolt assemblies, bearings, grease seals, water slingers, gland O-rings and case gaskets.
Aurora also sells repack kits for the 410, 420 and 480 Series, but those are sold without a published Aurora kit number — they list only their contents (12 packing rings, 4 swing bolt assemblies and case gaskets). If your pump only needs repacking, see our Aurora Pump Packing and Aurora Pump Swing Bolt Assemblies pages. The 420 Series rebuild kits (476-0647-644 to 476-0650-644) are not listed here.
How to Choose Aurora Pump Split Case Rebuild Kits
- Match the kit to your pump’s power series and size — Power Series 1 to 5 for the 410 kits, Power Series 2 to 5 for the 480 kits.
- Check whether your pump is packed or sealed — the 480 kits on this page are minor packed repair kits with PTFE and graphite packing rings.
- Note that the 410 kits include bronze lead-free shaft sleeves, unlike the factory Aurora kits.
- Check the shaft, sleeves and bearings before you order — a damaged shaft may need more than a kit. See our Aurora Pump Shaft Sleeves page.
- Use genuine Aurora parts, made to Aurora’s size and material.
- Not sure which of the 9 kits fits your pump? Email sales@kbsindustries.com with your pump model and part number.
Order Aurora Pump Split Case Rebuild Kits from KBS Industries
To order Aurora Pump Split Case Rebuild Kits, email sales@kbsindustries.com with your pump model and part number, or start from our Aurora Pump Spare Parts hub. For related parts, see Aurora Pump Mechanical Seals, Aurora Pump Seal Kits, Aurora Pump Glands and Aurora Pump Swing Bolt Assemblies. You can also check the Aurora brand page on the Pentair site.
