Tuesday, November 17, 2026

Peerless Pump Shaft Sleeves

Peerless Pump Shaft Sleeves: Browse our Peerless Pump Shaft Sleeves below. Every part is a genuine Peerless spare, shown with its part number, so you can find the shaft sleeve you need for your Peerless pump. The list covers 6 genuine Peerless Pump Shaft Sleeves. Contact KBS Industries if you need help finding the right part.

Peerless pump shaft sleeve 96690835 — Peerless Pump Shaft Sleeves

Shaft Sleeve — BSE2 / ISE2
96690835

Peerless pump shaft sleeve 96873865

Shaft Sleeve — BSE3 / ISE3
96873865

Peerless pump shaft sleeve 98623473

Shaft Sleeve — Left Hand
98623473

Peerless pump shaft sleeve 98623481

Shaft Sleeve — Right Hand
98623481

Peerless pump shaft sleeve 99157881

Shaft Sleeve — Left Hand, AE & AEF Group 3
99157881

Peerless pump shaft sleeve 99157819

Shaft Sleeve — Right Hand, AE & AEF Group 3
99157819

Each part on this page is a genuine Peerless pump part, listed with its Peerless part number. If you are matching a part from a pump nameplate, a service report or an old shaft sleeve, start with the number on this page and compare it with the number on your pump. A matching number is the surest way to order the right Peerless Pump Shaft Sleeves part.

The Peerless Pump Shaft Sleeves on this page are the sleeves that fit over the pump shaft where the seal runs, so the packing or the mechanical seal bears on the sleeve instead of on the shaft itself. A sleeve is cheaper to replace than a shaft, and a worn sleeve can be changed without taking the pump apart any further than the seal. The six sleeves on this page cover the BSE2, BSE3, ISE2 and ISE3 series and the left-hand and right-hand sleeves for AE and AEF pumps, part numbers 96690835, 96873865, 98623473, 98623481, 99157881 and 99157819.

Browse the full Peerless Pump Parts range, and see the other Peerless Pump categories: Peerless Pump Mechanical Seals, Peerless Pump Bearings, Peerless Pump Lantern Rings, Peerless Pump Packing Rings, Peerless Pump Glands, Peerless Pump Shaft Sleeves, Peerless Pump Casing Rings and Peerless Pump O-Rings.

How to Choose the Right Peerless Pump Shaft Sleeves

Match the part number first. Peerless part numbers are the fastest check: if the number on your old sleeve, your pump manual or your last order matches one on this page, you have the right part. Do not rely on size alone, because sleeves that look alike can differ in bore, length and the way they lock to the shaft.

Check the pump series. The BSE2 and ISE2 sleeves fit the smaller end-suction pumps, and the BSE3 and ISE3 sleeves fit the larger ones, so check the pump model and frame size before you order. For AE and AEF split-case pumps, check whether you need the left-hand or the right-hand sleeve, and which group the pump belongs to, because the two pairs of AE and AEF sleeves on this page cover different groups.

Inspect the old sleeve. A good sleeve is smooth where the seal runs, with no grooves, scoring or pitting. If the packing or the seal has worn a groove into the sleeve, the new seal will leak on the groove and the sleeve must be replaced. Check the O-ring groove and the sleeve bore as well, because a damaged bore will not seal to the shaft.

Mind the seal the sleeve works with. The sleeve carries the packing or the mechanical seal, so a sleeve change is the right time to check the seal parts too. If you are servicing a Peerless pump, see our Peerless Pump Mechanical Seals page for the seals and kits, and our Peerless Pump Packing Rings page for the packing. Changing the sleeve with the seal gives the new seal a smooth surface to run on.

For the manufacturer’s own information, see Peerless Pump. Peerless Pump Company builds the pumps these parts fit, including fire, industrial, municipal and process pumps, and their parts and service pages can help you confirm a pump model and its service parts. The Peerless Pump Shaft Sleeves on this page are genuine Peerless spares for those pumps.

Storing and Fitting Peerless Pump Shaft Sleeves

Store spare Peerless Pump Shaft Sleeves in a dry place, away from damp and grit, and keep each sleeve in its own bag or tube with its part number on the label. A sleeve can be scratched or dented if it is left loose in a drawer, and a scratch where the seal runs will leak. Check a stored sleeve for scoring and pitting before you fit it, and clean its bore so it slides onto the shaft without forcing.

Fit Peerless Pump Shaft Sleeves with the seal parts in the right order. Take the old seal and sleeve off, clean the shaft and check it for scoring, then slide the new sleeve on and fit its O-ring or gasket. Put the mechanical seal or the packing rings on the sleeve in the order you noted when you took the pump apart, and make sure the sleeve is locked to the shaft so it turns with it.

Do not force a sleeve onto the shaft. If the sleeve will not slide on easily, check that the shaft is clean and that you have the right part number for the pump. A sleeve that has to be hammered on is either the wrong bore or damaged, and fitting it anyway will score the shaft and the sleeve. Peerless Pump Shaft Sleeves should slide on by hand and sit square, with the seal running on a smooth surface.

After fitting, run the pump and watch the seal. A little leakage at first is normal while the packing or the seal beds in, but a steady stream or a hot stuffing box means something is wrong: stop the pump, check that the sleeve is locked to the shaft and the seal is seated, and check that the gland is tightened evenly. Write the part number and the fitting date on the pump file so the next service starts from the right Peerless Pump Shaft Sleeves part.

When to Replace Peerless Pump Shaft Sleeves

Replace a sleeve whenever the seal has worn a groove into it or the surface where the seal runs is scored or pitted. A grooved sleeve will leak with a new seal, and no amount of tightening will fix it. If the sleeve is still smooth, it can stay in service, but most service engineers change it with the seal because the part is cheap compared with opening the pump again.

Watch for the signs of a worn sleeve. A seal that leaks soon after it was changed, packing that wears out quickly, or a stuffing box that runs hot can all point to a sleeve that has had its day. Peerless Pump Shaft Sleeves that are grooved let the seal move on the shaft, which scores the seal faces and shortens the life of the next seal.

Keep a spare on the shelf. The six Peerless Pump Shaft Sleeves on this page cover the sleeves KBS Industries supplies for Peerless pumps, so keep the number for your pump on file and order a spare before the next planned service. A spare sleeve on the shelf means a service is never held up waiting for a part, and the pump is back in service on schedule.

Ordering from KBS Industries

KBS Industries supplies the Peerless Pump Shaft Sleeves on this page without prices or a cart: ask the team for a quote and they will confirm availability and delivery before you order. Keep the part number with the pump’s records so the next service goes faster. A note on the pump file with the sleeve number and the date it was fitted means the next person to open the pump orders the same sleeve without guessing.