Tuesday, November 17, 2026

Cleaver Brooks High Gas Pressure Switch

Cleaver Brooks High Gas Pressure Switch: Browse our Cleaver Brooks High Gas Pressure Switches with pictures below. Every part is a genuine Cleaver-Brooks spare, shown with its part number, so you can find the high gas pressure switch you need for your boiler. Contact KBS Industries if you need help finding the right part.

Cleaver Brooks High Gas Pressure Switch High Gas Pressure Switch, Transducer with Manual Reset On Decreasing Pressure & Breaks On Pressure Rise 817-00825

Cleaver-Brooks High Gas Pressure Switch, Transducer with Manual Reset On Decreasing Pressure & Breaks On Pressure Rise
817-00825

Cleaver Brooks High Gas Pressure Switch QPB32 Siemens High/Low Pressure Switch SPDT with Auto Reset 2-20 IN WC (Inches Water Column) 817-00987

Cleaver-Brooks QPB32 Siemens High/Low Pressure Switch SPDT with Auto Reset 2-20 IN WC (Inches Water Column)
817-00987

Cleaver Brooks High Gas Pressure Switch Switch, High Gas Pressure SPDT with M.R. 2-20" WC 817-00977

Cleaver-Brooks Switch, High Gas Pressure SPDT with M.R. 2-20″ WC
817-00977

Cleaver Brooks High Gas Pressure Switch Switch, High Gas Pressure SPDT with M.R. 5-28" WC 817-00848

Cleaver-Brooks Switch, High Gas Pressure SPDT with M.R. 5-28″ WC
817-00848

Cleaver Brooks High Gas Pressure Switch Switch, High Gas Pressure with M.R. 8-35" WC 817-00875

Cleaver-Brooks Switch, High Gas Pressure with M.R. 8-35″ WC
817-00875

Each Cleaver Brooks High Gas Pressure Switch on this page is a genuine Cleaver-Brooks spare for Cleaver-Brooks boilers. For the manufacturer’s own information, see Cleaver-Brooks. You can also browse our related Cleaver Brooks Relief Valve, Cleaver Brooks Warrick Control, Cleaver Brooks Actuator, Feedwater Valve Actuator, Cleaver Brooks Diffuser, Cleaver Brooks Low Gas Pressure Switch and Boiler Spare Parts pages.

These switches monitor the gas supply pressure to a burner and shut the burner down when pressure rises above the set point, so the correct range, reset type and connection matter. The parts below cover ASCO and Siemens models in different ranges, including manual-reset switches that trip when pressure falls or rises. Check the range, the reset type and the connection on your existing switch, then match it to the part number shown with each picture. If the number on your switch is worn or unclear, contact KBS Industries with the boiler model and the markings you can still read, and we will help you identify the right replacement.

Before you order, compare the pressure range on the switch label with the range shown above. A switch with the wrong range may trip too early or too late, and a manual-reset model will stay tripped until it is reset by hand, while an auto-reset model will reset itself when pressure returns to normal. If you are replacing a switch on a Cleaver-Brooks boiler, also check the pipe connection size and the electrical rating on the old switch, and keep the old part until the new one is fitted so you can compare them side by side.

Contact KBS Industries for help finding the right part for your boiler. Tell us the part number, range and type, and we will help you confirm the match before you order. If your boiler is out of service, tell us when you contact us and we will help you find a matching spare as quickly as possible. We also stock related boiler controls — see our Cleaver Brooks Relief Valve, Cleaver Brooks Warrick Control, Cleaver Brooks Actuator, Feedwater Valve Actuator, Cleaver Brooks Diffuser and Cleaver Brooks Low Gas Pressure Switch pages, or browse the full Boiler Spare Parts range.