Tuesday, November 17, 2026

Aurora Pump Case Wearing

Aurora Pump Case Wearing: Browse our 27 Aurora Pump Case Wearing rings with pictures below. Every part is a genuine Aurora spare, shown with its part number. The list covers general Aurora case wear rings and Aurora Pump 410 Series case wear rings, including the bronze impeller wear ring 676-1972-208. Contact KBS Industries if you need help finding the right part.

Aurora case wearing 676-1150-208 — Aurora Pump Case Wearing

Aurora Case Wearing
676-1150-208

Aurora case wearing 676-1151-208

Aurora Case Wearing
676-1151-208

Aurora case wearing 676-1152-208

Aurora Case Wearing
676-1152-208

Aurora case wearing 676-1154-208

Aurora Case Wearing
676-1154-208

Aurora case wearing 676-1155-208

Aurora Case Wearing
676-1155-208

Aurora case wearing 676-1684-208

Aurora Case Wearing
676-1684-208

Aurora case wearing 676-2100-208

Aurora Case Wearing
676-2100-208

Aurora case wearing 676-2036-222

Aurora Case Wearing
676-2036-222

Aurora case wearing 676-2037-222

Aurora Case Wearing
676-2037-222

Aurora case wearing 676-0003-208

Aurora Case Wearing
676-0003-208

Aurora case wearing 676-1148-208

Aurora Case Wearing
676-1148-208

Aurora case wearing 676-1149-208

Aurora Case Wearing
676-1149-208

Aurora case wearing 676-1744-208

Aurora Case Wearing
676-1744-208

Aurora case wearing 676-1720-208

Aurora Case Wearing
676-1720-208

Aurora case wearing 676-1747-208

Aurora Case Wearing
676-1747-208

Aurora case wearing 676-2136-208

Aurora Case Wearing
676-2136-208

Aurora case wearing 676-2138-208

Aurora Case Wearing
676-2138-208

Aurora case wearing 676-2137-208

Aurora Case Wearing
676-2137-208

Aurora case wearing 676-1750-208

Aurora Case Wearing
676-1750-208

Aurora case wearing 676-1989-208

Aurora Case Wearing
676-1989-208

Aurora case wearing 676-1988-208

Aurora Case Wearing
676-1988-208

Aurora case wearing 676-0018-208

Aurora Case Wearing
676-0018-208

Aurora case wearing 676-7125-208

Aurora Case Wearing
676-7125-208

Aurora case wearing 676-1985-208

Aurora Case Wearing
676-1985-208

Aurora case wearing 676-2056-208

Aurora Case Wearing
676-2056-208

Aurora case wearing 676-1969-208

Aurora Case Wearing
676-1969-208

Aurora case wearing 676-1972-208

Aurora Case Wearing
676-1972-208

Bronze impeller wear ring for Aurora 410 series pumps, size 10x12x18, power series 6B, built before October 1, 1985.

Each case wear ring on this page is a genuine Aurora spare part, listed with its part number so you can match it to the ring already fitted in your pump. Before you order, check the number stamped on your old ring, or on the pump nameplate and parts list, and compare it with the numbers shown above.

A worn ring can let water slip back from the discharge side to the suction side, so the pump moves less water, uses more power and wears faster. Replacing the ring at the right time helps restore clearances, flow and efficiency, and protects the impeller and casing from further wear. If the number on your old part is hard to read, tell us your pump model and size and we will help you check it.

For more Aurora pump parts, see our Aurora Pump Parts page and our Aurora Pump Spare Parts page. For seals and related parts, see our Mechanical Seals page. For the manufacturer’s own information, see Aurora Pump. If your pump needs a different spare, you can also browse the full Aurora range through those pages and contact KBS Industries for stock and pricing.

How to Choose the Right Aurora Pump Case Wearing Ring

Start with the part number, because that is the surest way to get the right Aurora Pump Case Wearing ring. The general rings on this page fit a range of Aurora pumps, while the 410 Series rings are made for Aurora Pump 410 Series pumps, so check your pump series as well as the number.

If the old ring has no readable number, use the pump model, size and serial number from the nameplate, and measure the ring if you can. The inside diameter, outside diameter and width must match the casing and the impeller, because a ring that is too loose will not hold its clearance and a ring that is too tight will bind.

Also look at the condition of the impeller wear surface and the casing bore, since a new ring will not last long if the surface it runs against is badly scored or out of round.

When a ring is worn, the signs are usually easy to spot once the pump is open. The gap between the ring and the impeller is wider than it should be, the ring surface is grooved or polished unevenly, and the pump may have lost flow or pressure even though the motor and impeller look sound.

In that case, replace the Aurora Pump Case Wearing ring and check the matching impeller ring at the same time, so the pair runs with the correct clearance. Fit the new ring squarely in the casing, keep it clean, and check that it sits firmly before the pump is put back together. If you are unsure about the fit, ask KBS Industries before you install the part, and keep the old ring and its number for reference.

Still not sure which Aurora Pump Case Wearing part you need? Contact KBS Industries — tell us your pump model and part number and we will help you find the right spare.