Aurora Pump Bearings
Aurora Pump Bearings: Browse our Aurora Pump Bearings below. Every part is a genuine Aurora spare, shown with its part number, so you can find the bearing you need for your Aurora pump. The list covers 28 genuine Aurora Pump Bearings, including power frame repair kits for Aurora 324A, 340 and 3800 Series pumps, with the same clear picture for every part. Contact KBS Industries if you need help finding the right part.
Aurora Pump Bearing
068-1907-647
Aurora Pump Bearing
068-0114-647
Aurora Pump Bearing
068-0159-647
Aurora Pump Bearing
068-2018-647
Aurora Pump Bearing
068-2206-647
Aurora Pump Bearing
068-2219-647
Aurora Pump Bearing
068-2308-647
Aurora Pump Bearing
068-2220-647
Aurora Pump Bearing
068-2310-647
Aurora Pump Bearing
068-2221-647
Aurora Pump Bearing
068-2506-647
Aurora Pump Bearing
068-1932-647
Aurora Pump Bearing
068-0182-647
Aurora Pump Bearing
068-0161-647
Aurora Pump Bearing
068-2022-647
Aurora Pump Bearing
068-0184-647
Aurora Pump Bearing
068-0462-647
Aurora Pump Bearing
068-0164-647

Aurora Pump Bearing
068-0160-647
Double-shielded replacement bearing for Aurora pumps.

Aurora Pump Bearing
068-0362-647
Double-shielded replacement bearing for Aurora pumps.

Aurora Pump Bearing
068-0364-647
Double-shielded replacement bearing for Aurora pumps.

Aurora Pump Bearing
068-0452-647
Double-shielded replacement bearing for Aurora pumps.

Aurora Pump Bearing
068-0454-647
Double-shielded replacement bearing for Aurora pumps.

Aurora Pump Bearing
068-0455-647
Double-shielded replacement bearing for Aurora pumps.

Aurora Pump Bearing
068-0456-647
Double-shielded replacement bearing for Aurora pumps.

Aurora Power Frame Repair Kit
476-0621-644
Repair kit for Aurora power frame 1, fitting 324A, 340 and 3800 series pumps. The kit includes bearings, grease seals, slingers, an O-ring and a retaining ring.

Aurora Power Frame Repair Kit
476-0622-644
Repair kit for Aurora power frame 2, fitting 340 and 3800 series pumps. The kit includes bearings, grease seals, slingers, an O-ring and a retaining ring.

Aurora Power Frame Repair Kit
476-0623-644
Repair kit for Aurora power frame 3, fitting 340 and 3800 series pumps. The kit includes bearings, grease seals, slingers, an O-ring and a retaining ring.
Every Aurora Pump Bearings listing on this page is a genuine Aurora spare part, listed with its part number so you can match it to the bearing in your pump. A worn bearing can cause noise, vibration and shaft movement, and it can damage the parts around it, so replacing it promptly helps protect the pump shaft, the mechanical seal and the case wear ring. Check the part number on your old bearing first, and if the number is hard to read, use the pump model, size and serial number from the nameplate.
A worn bearing can let the shaft move out of line, so the pump runs rough, vibrates and wears the seal and the shaft sleeve. If your pump is noisy, hard to turn by hand or running hot at the bearing housing, check the Aurora Pump Bearings on this page first. Replacing a worn bearing early is usually far cheaper than repairing the shaft, the seal or the casing after a bearing failure, and it keeps the pump running at its best.
For more Aurora pump parts, see our Aurora Pump Parts page and our Aurora Pump Spare Parts page, where the bearings below are listed with the other Aurora spare parts. You can also browse our Aurora Pump Case Wearing rings and our Aurora Pump Shaft Sleeves. If your pump also needs a seal, see our Mechanical Seals page. For the manufacturer’s own information, see Aurora Pump.
How to Choose the Right Aurora Pump Bearings
Start with the part number, because that is the surest way to get the right bearing. The Aurora Pump Bearings on this page are listed by part number, so match the number on your old bearing before you order. If the number is worn away, check the pump model, size and serial number on the nameplate and ask KBS Industries to match it for you.
Also look at the condition of the shaft and the shaft sleeve, since a new bearing will not last long on a scored shaft or a worn sleeve. If the shaft is damaged, replace the sleeve and the bearing together so the new parts run true and the seal stays in line.
When a bearing is worn, the signs are usually easy to spot once the pump is open. The shaft may feel loose or rough when you turn it by hand, and the bearing may look scored, rusty or dry. In that case, replace the bearing and check the matching seal at the same time, so the pair stays in good condition and the pump does not leak.
If you are not sure which bearing fits your pump, contact KBS Industries with your pump model and part number. Our pump experts will help you find the right Aurora Pump Bearings for your Aurora pump and confirm the fit before you order.
Still not sure which part you need? Contact KBS Industries — tell us your pump model and part number and we will help you find the right part.
