Bell & Gossett Glands
Bell & Gossett Glands: browse our Bell & Gossett Glands below. Every gland listed here is a genuine Bell & Gossett spare, shown with its part number, so you can find the gland you need for your Bell & Gossett pump. Contact KBS Industries if you need help finding the right part.
Bell & Gossett Gland
52-235-277-003
Bell & Gossett Gland
52-327-658-004
Bell & Gossett Gland
P6010971
Bell & Gossett Gland
P6010365
Bell & Gossett Gland
P6010099
Bell & Gossett Gland
P6010142
Bell & Gossett Gland
P6010887
Bell & Gossett Gland
P6010200
Bell & Gossett Gland
P6011240
Bell & Gossett Gland
P6011371
A gland is the plate that holds the mechanical seal in place and presses it against the seal housing. On a Bell & Gossett pump the gland keeps the seal faces loaded evenly, so the seal can hold pressure without leaking. It bolts to the pump’s seal housing, and its flat face and bolt holes must stay true, because any warp or damage lets the seal tilt and leak.
When a gland is cracked, corroded or worn at the bolt holes, the seal cannot seat correctly, and fitting a new seal alone will not stop the leak. The part numbers on this page are the numbers Bell & Gossett assigned to each gland, so you can match the gland you remove with the gland you order.
KBS Industries stocks genuine Bell & Gossett Glands for the pump models our customers run every day. Each Bell & Gossett Gland on this page is listed by its part number, so you can check it against the gland in your pump or against your pump nameplate before you order. If the number on your old gland is worn away, or if you are not sure which of the ten glands fits your pump, send us the pump model and serial number and we will help you confirm the match. We ship Bell & Gossett parts across the United States and support the pumps we sell.
Signs a Bell & Gossett Gland Needs Replacing
A steady leak at the seal housing, a gland plate that rocks on its seat, or bolt holes that have worn oval are the usual signs that a Bell & Gossett Gland is worn. Cracks around the bolt holes, pitting from corrosion, or a face that is no longer flat all mean the gland can no longer load the seal evenly. Replacing the gland at this stage protects the new seal, because a damaged gland will damage a new seal quickly. If your pump has started to leak at the seal, check the Bell & Gossett Gland before you order seals alone.
How to Choose the Right Bell & Gossett Glands
Start with the part number on the Bell & Gossett Gland you are replacing. Bell & Gossett Glands differ in bolt pattern, bore and thickness, so a gland that looks right can still be the wrong fit. Compare the number, check the bolt holes against the seal housing, and measure the bore before you order. If the gland ran with a damaged seal, inspect the seal and sleeve too, because a failed seal often scores the parts around it.
- Match the part number on the old gland exactly.
- Check the bolt pattern against the seal housing.
- Measure the gland bore and thickness.
- Replace a damaged seal and sleeve at the same time.
- Ask KBS Industries to confirm the fit if the number is unreadable.
Bell & Gossett Glands: What Fits Your Pump
Only ten Bell & Gossett Glands are listed on this page, because Bell & Gossett built these glands for specific pump frames, and each frame takes its own gland. The part number tells you which frame the gland belongs to, so start there and do not guess from size alone. Two glands can share a bore and still differ in bolt pattern or thickness, and any of those differences will stop the seal from seating correctly. If you have the pump nameplate, send us the model and serial number with your enquiry. We can then check the gland against the factory parts list for that pump and confirm the match before you order.
When a gland is replaced, it is good practice to fit a new seal at the same time, because the old seal has run against the worn gland and may not seat correctly on the new one. A fresh gland with a new seal gives the pump a clean start and protects the bearings from the leaks that a worn gland causes. KBS Industries can supply the matching Bell & Gossett seals, sleeves, bearings and shafts for the same pump, so the whole rebuild can be ordered together and fitted in one visit.
Bell & Gossett Glands at KBS Industries
KBS Industries supplies Bell & Gossett Glands with the part numbers shown on this page, and our team can help you find the right gland for your pump. Call or email us with your pump model, serial number or the part number from your old gland, and we will confirm the match before you order. We also stock Bell & Gossett seals, bearings, sleeves and shafts, so a full rebuild can be ordered in one place. Contact KBS Industries today to check stock of Bell & Gossett Glands and get your pump back in service.
Ordering Bell & Gossett Glands from KBS Industries is simple. Find the part number on this page, then call or email us with the number and your pump model. We will confirm the gland fits your pump, check our stock, and give you a delivery time. If you are rebuilding a pump, we can add the matching seal, sleeve and bearings to the same order, so everything arrives together and the pump can be rebuilt in one visit. Our team works with Bell & Gossett pumps every day, and we are glad to help you find the right part, even when the number on the old gland is hard to read.
Browse More Bell & Gossett Parts
You can find the full range on our Bell & Gossett page, with Bell & Gossett Mechanical Seals – HSC Pump, Bell & Gossett Mechanical Seals – End Suction Pump, Bell & Gossett Seal Replacement Kits, Bell & Gossett Bearings, Bell & Gossett Shaft Sleeves, Bell & Gossett Pump Shafts and Bell & Gossett Gaskets & Accessories. For pump curves, manuals and factory guidance, see the manufacturer’s Bell & Gossett website.
