Peerless Pump Bearings
Peerless Pump Bearings: Browse our Peerless Pump Bearings below. Every part is a genuine Peerless spare, shown with its part number, so you can find the bearing you need for your Peerless pump. The list covers 6 genuine Peerless Pump Bearings, including inboard and outboard bearings and bearing kits for the F Series. Contact KBS Industries if you need help finding the right part.
Inboard Bearing — Frame 1
96664692
Outboard Bearing — Frame 1
96676145
Inboard Bearing — Frame 2
96666435
Outboard Bearing — Frame 2
96674919
Bearing Kit — F Series, Frame 1
96828910
Bearing Kit — F Series, Frame 2
96828925
Each part on this page is a genuine Peerless pump part, listed with its Peerless part number. If you are matching a part from a pump nameplate, a service report or an old bearing, start with the number on this page and compare it with the number on your pump. A matching number is the surest way to order the right Peerless Pump Bearings part.
The Peerless Pump Bearings on this page cover the BSE2 and BSE3 bearing frames. Frame 1 takes the inboard bearing 96664692 and the outboard bearing 96676145, while Frame 2 takes the inboard bearing 96666435 and the outboard bearing 96674919. The two bearing kits, 96828910 for the F Series BSE2 Frame 1 and 96828925 for the F Series BSE3 Frame 2, gather the bearings for a frame into one kit for a rebuild. If your pump is a BSE2, order Frame 1 parts; if it is a BSE3, order Frame 2 parts.
Browse the full Peerless Pump Parts range, and see the other Peerless Pump categories: Peerless Pump Mechanical Seals, Peerless Pump Bearings, Peerless Pump Lantern Rings, Peerless Pump Packing Rings, Peerless Pump Glands, Peerless Pump Shaft Sleeves, Peerless Pump Casing Rings and Peerless Pump O-Rings.
How to Choose the Right Peerless Pump Bearings
Match the part number first. Peerless part numbers are the fastest check: if the number on your old bearing, your pump manual or your last order matches one on this page, you have the right part. Do not rely on size alone, because bearings that look alike can differ in bore, width and clearance.
Check inboard or outboard. The inboard bearing sits nearest the pump end and the outboard bearing sits nearest the drive end, so note which end of the shaft you are working on before you order. A bearing that fits the inboard position will not always fit the outboard position, even on the same frame.
Check the frame. BSE2 pumps use Frame 1 bearings and BSE3 pumps use Frame 2 bearings, so confirm the frame from the pump nameplate before you order. If you are rebuilding a whole frame, the F Series bearing kit for that frame can be simpler than ordering each bearing on its own.
Inspect the old bearing. A good bearing turns smoothly and quietly, with no roughness, play or rust. If yours feels rough, noisy or loose, replace it and check the shaft and housing for wear, because a worn shaft will spoil a new bearing quickly. Fit the new bearing clean and square, and keep it free of dirt while it goes on.
For the manufacturer’s own information, see Peerless Pump. Peerless Pump Company builds the pumps these parts fit, including fire, industrial, municipal and process pumps, and its parts and service pages cover the pump lines the Peerless Pump Bearings on this page support. When you match a part number here with a Peerless pump model there, you can be confident the part belongs to that pump family.
Ordering from KBS Industries
KBS Industries supplies the Peerless Pump Bearings on this page without prices or a cart: ask the team for a quote and they will confirm availability and delivery before you order. Keep the part number with the pump’s records so the next service goes faster. A note on the pump file with the bearing number, the frame and the date it was fitted means the next person to open the pump orders the same bearing without guessing.
