Peerless Pump Casing Rings
Peerless Pump Casing Rings: Browse our Peerless Pump Casing Rings below. Every part is a genuine Peerless spare, shown with its part number, so you can find the casing ring or rebuild kit you need for your Peerless pump. The list covers 5 genuine Peerless Pump Casing Rings. Contact KBS Industries if you need help finding the right part.
Casing Ring
98623454
BSE2 Series C & F Rebuild Kit
96828958
BSE3 Series C & F Rebuild Kit
96828959
ISE2 Series C & F Rebuild Kit
ISE2 Series C & F
ISE3 Series C & F Rebuild Kit
ISE3 Series C & F
Each part on this page is a genuine Peerless pump part, listed with its Peerless part number. If you are matching a part from a pump nameplate, a service report or an old casing ring, start with the number on this page and compare it with the number on your pump. A matching number is the surest way to order the right Peerless Pump Casing Rings part.
The Peerless Pump Casing Rings on this page are the rings and rebuild kits that renew the seal end of a Peerless end-suction pump. The casing ring, part number 98623454, is the wear ring that sets the clearance between the impeller and the casing. The BSE2 and BSE3 Series C and F rebuild kits, part numbers 96828958 and 96828959, are complete seal-end rebuild sets with a mechanical seal, a shaft sleeve, a deflector, gaskets and fixings. The ISE2 and ISE3 Series C and F kits are the stainless-steel-sleeve versions of the same rebuild sets, listed here by series because Peerless does not give them a separate part number.
Browse the full Peerless Pump Parts range, and see the other Peerless Pump categories: Peerless Pump Mechanical Seals, Peerless Pump Bearings, Peerless Pump Lantern Rings, Peerless Pump Packing Rings, Peerless Pump Glands, Peerless Pump Shaft Sleeves, Peerless Pump Casing Rings and Peerless Pump O-Rings.
How to Choose the Right Peerless Pump Casing Rings
Match the part number first. Peerless part numbers are the fastest check: if the number on your old casing ring or rebuild kit, your pump manual or your last order matches one on this page, you have the right part. Do not rely on size alone, because rings and kits that look alike can differ in bore, seal size and sleeve material.
Check the pump series and frame size. The BSE2 kit fits a 1.250 inch seal and frame sizes 143JM to 215JM, and the BSE3 kit fits a 1.500 inch seal and frame sizes 254JM to 326JM. The ISE2 and ISE3 kits use the same seal sizes but with a stainless steel shaft sleeve instead of the bronze sleeve in the BSE kits, so check whether your pump is a BSE or an ISE model before you order.
Inspect the old casing ring. A good casing ring is round and smooth, with no grooves or scoring where the impeller runs. If the ring is worn, the clearance between the impeller and the casing grows and the pump loses flow and head. Measure the clearance before you order, and check the impeller wear ring surface as well, because a worn impeller will wear the new ring out fast.
Mind what a rebuild kit holds. The BSE and ISE rebuild kits include the mechanical seal, the shaft sleeve with its O-ring, the capscrew, key and washer, the water deflector and the gaskets, so a kit renews the whole seal end in one order. If you only need the casing ring, order part 98623454 on its own. If you are servicing a Peerless pump, see our Peerless Pump Mechanical Seals page for the individual seals and repair kits.
For the manufacturer’s own information, see Peerless Pump. Peerless Pump Company builds the pumps these parts fit, including fire, industrial, municipal and process pumps, and their parts and service pages can help you confirm a pump model and its service parts. The Peerless Pump Casing Rings on this page are genuine Peerless spares for those pumps.
Storing and Fitting Peerless Pump Casing Rings
Store spare Peerless Pump Casing Rings in a dry place, away from damp and grit, and keep each ring or kit in its own bag or box with its part number on the label. A casing ring can be scratched or dented if it is left loose in a drawer, and a scratch where the impeller runs will wear the ring out fast. Check a stored ring for scoring before you fit it, and keep the kit parts together so nothing is missing at fitting time.
Fit Peerless Pump Casing Rings with the seal end apart. Take the old ring out, clean the casing bore and check it for scoring, then press the new ring in square and check the clearance to the impeller. For a rebuild kit, fit the sleeve onto the shaft, then the mechanical seal, the deflector and the gaskets in the order you noted when you took the pump apart, and make sure the sleeve is locked to the shaft so it turns with it.
Check the clearance after fitting. The gap between the impeller and the casing ring sets how much liquid slips back past the impeller, so a wide gap costs flow and head. Peerless Pump Casing Rings should give the clearance the pump manual calls for: too tight and the impeller will rub, too wide and the pump will not reach its duty. Measure the gap with a feeler gauge before you close the pump up.
After fitting, run the pump and watch the seal and the performance. A little leakage at first is normal while the seal beds in, but a steady stream, a hot stuffing box or a pump that will not reach its duty means something is wrong: stop the pump, check that the seal is seated and the sleeve is locked, and check the casing ring clearance. Write the part number and the fitting date on the pump file so the next service starts from the right Peerless Pump Casing Rings part.
When to Replace Peerless Pump Casing Rings
Replace a casing ring whenever the clearance to the impeller has grown beyond the pump manual’s limit, or the ring is scored, grooved or cracked. A worn ring costs flow and head, and no amount of adjustment will bring them back. If the ring is still smooth and the clearance is within limits, it can stay in service, but most service engineers change it with the seal because the part is cheap compared with opening the pump again.
Watch for the signs of a worn casing ring. A pump that has lost flow or head, a casing ring that shows a groove where the impeller runs, or a seal that leaks soon after it was changed can all point to a ring that has had its day. Peerless Pump Casing Rings that are worn thin let the impeller move in the casing, which scores the ring and shortens the life of the next seal.
Keep a spare on the shelf. The five Peerless Pump Casing Rings on this page cover the rings and rebuild kits KBS Industries supplies for Peerless pumps, so keep the number for your pump on file and order a spare before the next planned service. A spare ring or kit on the shelf means a service is never held up waiting for a part, and the pump is back in service on schedule.
Ordering from KBS Industries
KBS Industries supplies the Peerless Pump Casing Rings on this page without prices or a cart: ask the team for a quote and they will confirm availability and delivery before you order. Keep the part number with the pump’s records so the next service goes faster. A note on the pump file with the casing ring number and the date it was fitted means the next person to open the pump orders the same part without guessing.
