Aurora Pump Mechanical Seals
Aurora Pump Mechanical Seals: Browse our Aurora Pump Mechanical Seals below. The list covers 8 genuine Aurora Pump Mechanical Seals, shown with their part numbers, for Aurora 320 and 340 Series pumps and for high-pressure Aurora pumps. Every part is a genuine Aurora spare — contact KBS Industries if you need help finding the right part.

High-pressure Aurora pump mechanical seal, 1.750 in, Buna/carbon/tungsten carbide
712-1433-747

High-pressure Aurora pump mechanical seal, 1.750 in, EPR/carbon/tungsten carbide
712-1433-769

High-pressure Aurora pump mechanical seal, 2.000 in, Buna/carbon/tungsten carbide
712-1434-747

High-pressure Aurora pump mechanical seal, 2.000 in, EPR/carbon/tungsten carbide
712-1434-769

High-pressure Aurora pump mechanical seal, 2.375 in, Buna/carbon/tungsten carbide
712-1435-747

High-pressure Aurora pump mechanical seal, 2.375 in, EPR/carbon/tungsten carbide
712-1435-769

Aurora 340 Series XL mechanical seal, 2.000 in bore
712-1014-749

Aurora 320 Series mechanical seal
712-1004-749
Every Aurora Pump Mechanical Seals listing above shows the part number you need to match the seal to your pump. Check the shaft size and the seal materials before you order. Buna seals suit general service, while EPR seals are the choice for hot-water service.
A worn Aurora pump mechanical seal lets the pump leak at the shaft and can damage the shaft sleeve. Replace the seal and check the sleeve at the same time — see our Aurora Pump Shaft Sleeves page. For the full Aurora pump range, start from our Aurora Pump Spare Parts hub.
What Are Aurora Pump Mechanical Seals?
A mechanical seal is the part that keeps the pumped liquid inside an Aurora pump where the shaft passes through the pump casing. Aurora Pump Mechanical Seals sit between the rotating shaft and the stationary pump housing, so the pump can run without leaking at the shaft. When the seal faces wear, the pump starts to drip or spray at the shaft, and the seal has to be replaced.
The Aurora Pump Mechanical Seals on this page cover the high-pressure replacement seals in 1.750-inch, 2.000-inch and 2.375-inch shaft sizes, with Buna or EPR elastomers and carbon faces running against tungsten carbide. The list also includes the Aurora 340 Series XL seal for the 2.000-inch bore and the Aurora 320 Series seal. Each seal is a genuine Aurora spare, made to the size and material Aurora specifies for the pump.
Choose Buna seals for general service with water and light oils. Choose EPR seals where the pump handles hot water. Carbon faces run against tungsten carbide in the high-pressure Aurora Pump Mechanical Seals on this page, which suits the higher pressures these seals are built for. If the liquid is abrasive or the pump has run dry, check the seal faces and the shaft sleeve before fitting the new seal.
How to Choose Aurora Pump Mechanical Seals
- Match the part number to your pump model before you order.
- Check the shaft size — the seal must fit the shaft. Measure the shaft or check the pump nameplate.
- Choose the seal materials for your liquid — Buna/carbon/tungsten carbide for general service, EPR/carbon/tungsten carbide for hot-water service.
- Check the shaft sleeve for wear — a scored sleeve can damage a new seal. See our Aurora Pump Shaft Sleeves page.
- Use genuine Aurora parts, made to Aurora’s size and material.
- Keep a spare seal on site — a mechanical seal is a wear part.
- Not sure which of the 8 parts fits your pump? Email sales@kbsindustries.com with your pump model and part number.
Order Aurora Pump Mechanical Seals from KBS Industries
To order Aurora Pump Mechanical Seals, email sales@kbsindustries.com with your pump model and part number, or start from our Aurora Pump Spare Parts hub. For related parts, see Aurora Pump Seal Kits, Aurora Pump Glands and Aurora Pump Shaft Sleeves. You can also check the Aurora brand page on the Pentair site.
