Aurora Pump O-Rings
Aurora Pump O-Rings: Browse our Aurora Pump O-Rings below. Every part is a genuine Aurora spare, shown with its part number, so you can find the O-ring you need for your Aurora pump. The list covers 1 genuine Aurora Pump O-Ring. Contact KBS Industries if you need help finding the right part.
Aurora pump O-ring, Viton
364-0465-494
The Aurora Pump O-Rings listing above shows the part number you need to match the O-ring to your pump. O-rings are small parts, but a worn or swollen O-ring lets the pump leak at the casing joint or at the seal chamber, so it pays to replace them whenever the pump is opened. Keep a spare on site — an O-ring costs little and saves a second strip-down.
This O-ring is made from Viton, a fluorocarbon rubber that stands up to heat and to many chemicals, which is why Aurora fits Viton O-rings where the pump handles hot water. If you are rebuilding an Aurora pump, check the O-rings in the seal kit as well — see our Aurora Pump Seal Kits page. For the full Aurora pump range, start from our Aurora Pump Spare Parts hub.
What Are Aurora Pump O-Rings?
An O-ring is a round rubber ring that sits in a groove and seals the joint between two parts of an Aurora pump. Aurora Pump O-Rings seal the casing joint and the seal chamber, keeping the pumped liquid inside the pump. The ring is squeezed slightly when the joint is bolted up, and that squeeze is what makes the seal. A ring that has gone hard, flat or swollen no longer seals, and the pump leaks.
Viton O-rings suit hot-water service and many chemicals, and they keep their shape at temperatures where Buna O-rings harden. The Aurora Pump O-Rings on this page are genuine Aurora spares, made to the size Aurora specifies for the pump, so the ring fits its groove and seals first time.
Storing and Fitting Aurora Pump O-Rings
Store Aurora Pump O-Rings in a cool, dark place, away from sunlight, ozone and solvents, and keep them in their bag until you need them. A Viton O-ring has a long shelf life when it is stored this way, but a ring that has been left in the sun or stretched over a hook can take a set and fail early.
Fit the O-ring clean and dry, without stretching it more than you have to, and make sure the groove is clean and free of old rubber and grit. Do not use a sharp tool to push the ring into its groove — a nick in the rubber is a leak waiting to happen. Bolt the joint up evenly so the ring is squeezed the same way all round.
How to Choose Aurora Pump O-Rings
- Match the part number to your pump before you order.
- Check the size — the O-ring must fit its groove. Measure the old ring or check the pump nameplate.
- Choose Viton for hot water and chemical service.
- Replace O-rings whenever the pump is opened — a used ring rarely seals as well the second time.
- Use genuine Aurora parts, made to Aurora’s size and material.
- Not sure which part fits your pump? Email sales@kbsindustries.com with your pump model and part number.
Order Aurora Pump O-Rings from KBS Industries
To order Aurora Pump O-Rings, email sales@kbsindustries.com with your pump model and part number, or start from our Aurora Pump Spare Parts hub. For related parts, see Aurora Pump Mechanical Seals, Aurora Pump Seal Kits and Aurora Pump Glands. You can also check the Aurora brand page on the Pentair site.
If the O-ring you need is not the one on this page, email KBS Industries — we stock the full Aurora range and can help you find the right part.
