Vortex Flow Meter VFM55MV Micro – Gas Only
The Vortex Flow Meter VFM55MV Micro is a compact vortex meter made for gas only, for wet air and industrial gas in small lines. Its small threaded connections, LCD display and battery option make it practical for gas metering at the point of use, on a machine, in a cabinet or on a small branch line. It is a multi-variable meter: it measures flow, pressure and temperature, so it can correct the gas reading for conditions in the line.

It works on the vortex shedding principle: a bluff body sheds vortices alternately from each side, and the shedding rate rises with flow velocity. The meter counts that rate, with no moving parts in the stream to wear.
The VFM55MV Micro is for gas only – not steam or liquid. It is made for wet air and industrial gas, including air that carries moisture, common on compressed air lines and undried gas lines. For steam or liquid, use one of the gas, steam and liquid models listed at the end of this page.
Features
- Gas only – for wet and dry air and industrial gas in small lines; not steam or liquid.
- Multi-variable meter: measures flow, pressure and temperature, and corrects the gas reading for conditions in the line, giving standard flow from one small device.
- Small threaded connections (DN8 to DN25) – screws straight into a small gas line without flanges or a spool piece.
- LCD display showing temperature, pressure and standard flow.
- Pulse and 4-20 mA outputs, with RS485 and Bluetooth.
- Battery or 24 V DC power – the 3.6 V lithium battery (ER26500) suits lines away from a power supply.
- Bluetooth operation for reading and setting values through the Comate app, useful where a wired connection is awkward to reach.
- Dual-sensor design for anti-vibration, keeping readings steady in compact installations.
- No moving parts in the stream to wear.
Specification
Measurement range
Flow range is 16 to 300 litres per minute – choose the size whose range covers the normal and low flow, not simply the pipe size.
| Line pressure | Minimum standard flow | Maximum standard flow |
|---|---|---|
| 4 barG | 80 NL/min | 1500 NL/min |
| 5 barG | 96 NL/min | 1800 NL/min |
| 6 barG | 112 NL/min | 2100 NL/min |
| 7 barG | 128 NL/min | 2400 NL/min |
Standard flow (NL/min) for pipe sizes DN8 to DN25.
Specification of VFM55MV Micro vortex flow meter
| Item | VFM55MV Micro detail |
|---|---|
| Media | Gas only, wet air and industrial gas |
| Flow range | 16 to 300 L/min (volume flow) |
| Pipe sizes | DN8, DN10, DN15, DN20, DN25 (1/4 to 1 inch) |
| Connections | Threaded; DN8 G1/4 inch female, DN10 G3/8 inch female, DN15 G1/2 inch male, DN20 G3/4 inch male, DN25 G1 inch male |
| Display | LCD, showing temperature, pressure and standard flow |
| Power | 16 to 32 V DC, or 3.6 V lithium battery (ER26500); 24 V DC port |
| Outputs | Pulse and 4-20 mA; RS485 and Bluetooth |
| Flow accuracy | ±1.0% of reading |
| Pressure accuracy | ±0.75% of full scale |
| Temperature accuracy | ±1.0 °C |
| Fluid temperature | -40 to 85 °C |
| Fluid pressure | 1.6 MPa |
| Sensor | PPS |
| Bore | Aluminium |
| Enclosure | PC and ABS |
| Anti-vibration | Dual-sensor design |
Fluid temperature is -40 to 85 °C – it covers cold gas lines and warm compressor outlet air, but it is not a high-temperature meter and must not be used on steam or hot fluids.
The VFM55MV Micro suits compressed air and wet air metering at the point of use, small industrial gas lines, gas use on a machine or a process skid, and any small gas line where a compact threaded meter is easier to fit than a flanged one. The battery option suits lines away from a power supply, and the Bluetooth option suits meters fitted where a wired connection would be awkward to reach. Because the meter measures pressure and temperature as well as flow, it gives a compensated gas reading from one small device, without extra transmitters and wiring.
Model selection
| Selection | Code | Description |
|---|---|---|
| Pipe size and connection | 08 | G1/4 inch thread, female |
| Pipe size and connection | 10 | G3/8 inch thread, female |
| Pipe size and connection | 15 | G1/2 inch thread, male |
| Pipe size and connection | 20 | G3/4 inch thread, male |
| Pipe size and connection | 25 | G1 inch thread, male |
| Output | Pulse, RS485, Bluetooth (standard) | |
| Accuracy | 1.0% of reading (option); 3.0% of reading (standard) | |
| Power supply | Battery, 3.6 V lithium ER26500 (option); 24 V DC, 16 to 32 V DC (standard) |
Dimensions
The overall dimension of the Vortex Flow Meter VFM55MV Micro is 82 x 165.5 x 130 mm, about 3.23 x 6.52 x 5.12 inches.
| DN size | Size (inches) |
|---|---|
| DN8 | 1/4 inch |
| DN10 | 3/8 inch |
| DN15 | 1/2 inch |
| DN20 | 3/4 inch |
| DN25 | 1 inch |
When choosing between this model and the others in the range, the deciding points are the media and the size. The VFM55MV Micro covers gas only, in sizes DN8 to DN25, and it is the smallest meter in this range. For gas, steam and liquid in larger lines, see the Vortex Flow Meter VFM60 and the Vortex Flow Meter VFM80. For another gas-only micro meter, including some corrosive fluids, see the Vortex Flow Meter VFM52MV Micro. The vortex flow meter hub page covers the VFM60MV flanged 150C model in detail.
Document
- VFM55 Vortex Flow Transmitter Datasheet (PDF, Comate)
If you are unsure which size fits your line, check the figures above first.
