Tuesday, November 17, 2026

Vortex Flow Meter VFM52MV Micro – Gas Only

The Vortex Flow Meter VFM52MV Micro is a compact vortex meter made for gas only, including some corrosive fluids. It is made in just two sizes, DN15 (1/2 inch) and DN25 (1 inch), each with a male threaded connection, so it screws straight into a small gas line without flanges or a spool piece. Its PPS sensor, bore and enclosure suit gas that would attack a metal meter. It is a multi-variable meter: it measures flow, pressure and temperature, so it can correct the gas reading for conditions in the line.

Vortex Flow Meter VFM52MV Micro

It works on the vortex shedding principle: a bluff body sheds vortices alternately from each side, and the shedding rate rises with flow velocity. The meter counts that rate, with no moving parts in the stream to wear.

The VFM52MV Micro is for gas only – not steam or liquid. It suits industrial gas, including some corrosive fluids that need a PPS wetted path rather than a metal one. For steam or liquid, use one of the gas, steam and liquid models listed at the end of this page.

Features

  • Gas only – including some corrosive fluids that need a PPS wetted path rather than a metal one; not steam or liquid.
  • PPS sensor, bore and enclosure – suits gas that would attack a metal meter.
  • Multi-variable meter: measures flow, pressure and temperature, and corrects the gas reading for conditions in the line.
  • Just two sizes, DN15 (20 to 300 L/min) and DN25 (90 to 1,800 L/min), each with a male threaded connection – screws straight into a small gas line without flanges or a spool piece; turndown 1:15.
  • LCD display at the meter.
  • Pulse and 4-20 mA outputs, with RS485 and Bluetooth.
  • Bluetooth operation for reading and setting values through the Comate app.
  • Dual-sensor design for anti-vibration.
  • No moving parts in the stream to wear.

Specification

Measurement range

The meter is made in two sizes only: DN15 (1/2 inch), G1/2 inch male, 20 to 300 litres per minute; and DN25 (1 inch), G1-1/4 inch male, 90 to 1,800 litres per minute. Together they cover 20 to 1,800 litres per minute. Choose the size whose range covers the normal and low flow, not simply the pipe size. Turndown is 1:15.

SizeConnectionFlow range
DN15 (1/2 inch)G1/2 inch, male20 to 300 L/min
DN25 (1 inch)G1-1/4 inch, male90 to 1,800 L/min

Specification of VFM52MV Micro vortex flow meter

ItemVFM52MV Micro detail
MediaGas only, including some corrosive fluids
SizesDN15 (1/2 inch) and DN25 (1 inch) only
Flow range20 to 1,800 L/min (DN15: 20 to 300 L/min; DN25: 90 to 1,800 L/min)
Turndown1:15
ConnectionsMale threaded; DN15 G1/2 inch, DN25 G1-1/4 inch
DisplayLCD
Power16 to 32 V DC
OutputsPulse and 4-20 mA; RS485 and Bluetooth
Flow accuracy±1.0% of reading
Pressure accuracy±0.75% of full scale
Temperature accuracy±1.0 °C
Fluid pressure1.0 MPa
Sensor, bore and enclosurePPS
Anti-vibrationDual-sensor design

The VFM52MV Micro suits small industrial gas lines, gas use on a machine or a process skid, and gas that needs a PPS wetted path, including some corrosive fluids that would attack a metal meter. Its two threaded sizes fit where space is tight, and it gives a compensated gas reading from one small device, without extra transmitters and wiring.

Model selection

SelectionVFM52MV Micro options
Size and connectionDN15 (1/2 inch), G1/2 inch male – 20 to 300 L/min
Size and connectionDN25 (1 inch), G1-1/4 inch male – 90 to 1,800 L/min
OutputPulse, RS485, Bluetooth
Power supply16 to 32 V DC

Dimensions in millimetres and inches

Dimensions below are in millimetres and inches. The two sizes share the same display and enclosure diameters, and differ in length and height; DN25 is longer and taller, matching its larger flow range.

DimensionDN15 (1/2 inch)DN25 (1 inch)
Display diameter, L165.7 mm (2.59 inches)65.7 mm (2.59 inches)
Width, L90 mm (3.54 inches)110 mm (4.33 inches)
Height, H93.5 mm (3.68 inches)111 mm (4.37 inches)
Max width, S172.6 mm (2.86 inches)73 mm (2.87 inches)
Enclosure diameter, S60 mm (2.36 inches)60 mm (2.36 inches)

When choosing between this model and the others in the range, the deciding points are the media, the size and the fluid. The VFM52MV Micro covers gas only, in DN15 (1/2 inch) and DN25 (1 inch), with a PPS sensor, bore and enclosure. For gas, steam and liquid in larger lines, see the Vortex Flow Meter VFM60 and the Vortex Flow Meter VFM80. For another gas-only micro meter, for wet air and industrial gas in sizes DN8 to DN25, see the Vortex Flow Meter VFM55MV Micro. The vortex flow meter hub page covers the VFM60MV flanged 150C model in detail.

Document

If you are unsure which size fits your line, check the figures above first.