Vortex Flow Meter VFM52MV Micro – Gas Only
The Vortex Flow Meter VFM52MV Micro is a compact vortex meter made for gas only, including some corrosive fluids. It is made in just two sizes, DN15 (1/2 inch) and DN25 (1 inch), each with a male threaded connection, so it screws straight into a small gas line without flanges or a spool piece. Its PPS sensor, bore and enclosure suit gas that would attack a metal meter. It is a multi-variable meter: it measures flow, pressure and temperature, so it can correct the gas reading for conditions in the line.

It works on the vortex shedding principle: a bluff body sheds vortices alternately from each side, and the shedding rate rises with flow velocity. The meter counts that rate, with no moving parts in the stream to wear.
The VFM52MV Micro is for gas only – not steam or liquid. It suits industrial gas, including some corrosive fluids that need a PPS wetted path rather than a metal one. For steam or liquid, use one of the gas, steam and liquid models listed at the end of this page.
Features
- Gas only – including some corrosive fluids that need a PPS wetted path rather than a metal one; not steam or liquid.
- PPS sensor, bore and enclosure – suits gas that would attack a metal meter.
- Multi-variable meter: measures flow, pressure and temperature, and corrects the gas reading for conditions in the line.
- Just two sizes, DN15 (20 to 300 L/min) and DN25 (90 to 1,800 L/min), each with a male threaded connection – screws straight into a small gas line without flanges or a spool piece; turndown 1:15.
- LCD display at the meter.
- Pulse and 4-20 mA outputs, with RS485 and Bluetooth.
- Bluetooth operation for reading and setting values through the Comate app.
- Dual-sensor design for anti-vibration.
- No moving parts in the stream to wear.
Specification
Measurement range
The meter is made in two sizes only: DN15 (1/2 inch), G1/2 inch male, 20 to 300 litres per minute; and DN25 (1 inch), G1-1/4 inch male, 90 to 1,800 litres per minute. Together they cover 20 to 1,800 litres per minute. Choose the size whose range covers the normal and low flow, not simply the pipe size. Turndown is 1:15.
| Size | Connection | Flow range |
|---|---|---|
| DN15 (1/2 inch) | G1/2 inch, male | 20 to 300 L/min |
| DN25 (1 inch) | G1-1/4 inch, male | 90 to 1,800 L/min |
Specification of VFM52MV Micro vortex flow meter
| Item | VFM52MV Micro detail |
|---|---|
| Media | Gas only, including some corrosive fluids |
| Sizes | DN15 (1/2 inch) and DN25 (1 inch) only |
| Flow range | 20 to 1,800 L/min (DN15: 20 to 300 L/min; DN25: 90 to 1,800 L/min) |
| Turndown | 1:15 |
| Connections | Male threaded; DN15 G1/2 inch, DN25 G1-1/4 inch |
| Display | LCD |
| Power | 16 to 32 V DC |
| Outputs | Pulse and 4-20 mA; RS485 and Bluetooth |
| Flow accuracy | ±1.0% of reading |
| Pressure accuracy | ±0.75% of full scale |
| Temperature accuracy | ±1.0 °C |
| Fluid pressure | 1.0 MPa |
| Sensor, bore and enclosure | PPS |
| Anti-vibration | Dual-sensor design |
The VFM52MV Micro suits small industrial gas lines, gas use on a machine or a process skid, and gas that needs a PPS wetted path, including some corrosive fluids that would attack a metal meter. Its two threaded sizes fit where space is tight, and it gives a compensated gas reading from one small device, without extra transmitters and wiring.
Model selection
| Selection | VFM52MV Micro options |
|---|---|
| Size and connection | DN15 (1/2 inch), G1/2 inch male – 20 to 300 L/min |
| Size and connection | DN25 (1 inch), G1-1/4 inch male – 90 to 1,800 L/min |
| Output | Pulse, RS485, Bluetooth |
| Power supply | 16 to 32 V DC |
Dimensions in millimetres and inches
Dimensions below are in millimetres and inches. The two sizes share the same display and enclosure diameters, and differ in length and height; DN25 is longer and taller, matching its larger flow range.
| Dimension | DN15 (1/2 inch) | DN25 (1 inch) |
|---|---|---|
| Display diameter, L1 | 65.7 mm (2.59 inches) | 65.7 mm (2.59 inches) |
| Width, L | 90 mm (3.54 inches) | 110 mm (4.33 inches) |
| Height, H | 93.5 mm (3.68 inches) | 111 mm (4.37 inches) |
| Max width, S1 | 72.6 mm (2.86 inches) | 73 mm (2.87 inches) |
| Enclosure diameter, S | 60 mm (2.36 inches) | 60 mm (2.36 inches) |
When choosing between this model and the others in the range, the deciding points are the media, the size and the fluid. The VFM52MV Micro covers gas only, in DN15 (1/2 inch) and DN25 (1 inch), with a PPS sensor, bore and enclosure. For gas, steam and liquid in larger lines, see the Vortex Flow Meter VFM60 and the Vortex Flow Meter VFM80. For another gas-only micro meter, for wet air and industrial gas in sizes DN8 to DN25, see the Vortex Flow Meter VFM55MV Micro. The vortex flow meter hub page covers the VFM60MV flanged 150C model in detail.
Document
- VFM55 Vortex Flow Transmitter Datasheet (PDF, Comate) – the datasheet for the VFM55 micro transmitter family
If you are unsure which size fits your line, check the figures above first.
