A-C Pump Lantern Rings
A-C Pump Lantern Rings: this page lists the 3 genuine A-C Pump lantern rings that KBS Industries carries for A-C (Allis Chalmers) pumps, shown with part numbers below.
A lantern ring sits in the stuffing box between the packing rings. It holds the packing in place and lets sealing water reach the shaft, so the packing stays cool and sealed.
Use the part numbers below to match the ring to your pump before you order, and contact KBS Industries if you need help finding the right part. For the full A-C Pump range, start from our A-C Pump hub page.
A-C Pump Lantern Ring
AC0803
Two-piece PTFE split lantern ring for A-C 1580 Series fire pumps and B&G VSX Series pumps. It spaces the packing rings and feeds sealing water into the stuffing box.
A-C Pump Lantern Ring
P84985
Two-piece PTFE split lantern ring for A-C 1580 Series fire pumps and B&G 1531 Series pumps. It spaces the packing rings and feeds sealing water into the stuffing box.
A-C Pump Lantern Ring
P84986
Two-piece PTFE split lantern ring for A-C 1580 Series fire pumps and B&G 1531, VSC and VSCS Series pumps. It spaces the packing rings and feeds sealing water into the stuffing box.
What Are A-C Pump Lantern Rings?
A-C Pump Lantern Rings are split rings that fit inside the stuffing box of an A-C pump, between the packing rings. They keep the packing rings in the right place and leave a channel for sealing water to reach the shaft.
Without a lantern ring, the packing can shift and block the sealing water. The ring also lets the sealing water cool the packing and wash grit away from the shaft, which helps the packing last longer.
The rings listed here are two-piece PTFE split rings. They can be fitted around the shaft without taking the pump apart, which makes a packing service much quicker. The part number is the surest way to match a ring: sizes differ from one pump model to another, and a ring that looks close can still be the wrong size.
Check the part number on the old ring or on the pump nameplate, then match it to the numbers listed on this page. KBS Industries supplies genuine A-C parts made to the original size and material. If your pump also needs other parts, see our A-C Pump Packing Rings, A-C Pump Shaft Sleeves, A-C Pump Mechanical Seals and A-C Pump Minor Repair Kits pages.
How to Choose A-C Pump Lantern Rings
- Match the part number to your pump model before you order. The numbers on this page are AC0803, P84985 and P84986.
- Check which pump series the ring fits. AC0803 fits A-C 1580 Series fire pumps and B&G VSX Series pumps, while P84985 and P84986 fit A-C 1580 Series and B&G 1531 Series pumps.
- Check the shaft size and the stuffing box bore. The ring must sit snugly on the shaft without binding.
- Fit the ring with its split lined up with the sealing water port, so water can reach the shaft.
- Replace the lantern ring when you renew the packing. A worn or cracked ring will not hold the packing in place.
- Keep a spare ring on site. Lantern rings are small, low cost parts, and having one ready avoids downtime.
- Not sure which part fits your pump? Email sales@kbsindustries.com with your pump model and part number.
Order A-C Pump Lantern Rings from KBS Industries
To order A-C Pump Lantern Rings, email sales@kbsindustries.com with your pump model and the part number, or start from our A-C Pump hub.
For related A-C parts, see A-C Pump Mechanical Seals, A-C Pump Replacement Seal Kits, A-C Pump Minor Repair Kits, A-C Pump Shaft Sleeves, A-C Pump Casing Gaskets and A-C Pump Packing Rings. A-C Pump is a Xylem brand — see the Xylem site for more on the brand. KBS Industries supplies genuine A-C Pump parts for Allis Chalmers pumps, and we can help you match the right part to your pump.
