Armstrong Pump Bearings
Armstrong Pump Bearings: Browse our Armstrong Pump Bearings below. The list covers 4 genuine Armstrong Pump Bearings, shown with their part numbers, for Armstrong pumps. Every part is a genuine Armstrong spare, supplied by KBS Industries. Check the part number on the bearing you are replacing before you order, and contact KBS Industries if you need help finding the right part for your pump.
Bearing for Armstrong Pumps
871101-364
Bearing for Armstrong Pumps
871101-383
Bearing for Armstrong Pumps
871101-684
Bearing for Armstrong Pumps
871101-703
The four bearings above are the Armstrong pump bearings we list at KBS Industries. No picture is shown for these bearings yet, because no Armstrong bearing picture is held on this site. The part number is the reliable way to identify the bearing you need, so please match it exactly to the bearing removed from your pump.
How to Choose Armstrong Pump Bearings
To choose the right Armstrong Pump Bearings for your pump, start with the part number on the bearing you are replacing. That number is printed on the bearing or listed in the pump parts list, and it is the surest match.
Next, check the pump model and the position of the bearing in the pump, because different Armstrong pump models use different bearings. A bearing that looks the same but carries a different part number may not fit your pump, so do not guess from appearance alone.
- Match the full part number exactly, including every digit and hyphen.
- Check the Armstrong pump model and the bearing position before you order.
- Replace bearings in pairs where the pump design calls for a matched pair.
- Keep the old bearing until the new one is fitted, so the numbers can be checked again.
- Ask KBS Industries for help if the part number is worn, damaged or hard to read.
Armstrong Pump Bearings: Fitment Notes
Armstrong pump bearings carry the load of the rotating shaft and keep the shaft running true, so a worn bearing can cause noise, vibration, heat and seal trouble. If a pump is noisy, runs hot, or the shaft has play, the bearing is one of the first parts to check.
When you fit a new bearing, keep it clean and dry, handle it by its outer ring where possible, and follow the pump maker fitting guidance for the model you have. Do not reuse a bearing that has been removed with force, and do not mix a new bearing with a worn housing if the housing is damaged.
The bearings listed on this page are genuine Armstrong spares, and each one is listed by its Armstrong part number only, with no price and no cart on this page. For a price and for availability, contact KBS Industries with the part number and your pump model, and we will help you confirm the right bearing. You can also check pump model information on the Armstrong Fluid Technology website.
Order Armstrong Pump Bearings from KBS Industries
Order Armstrong Pump Bearings from KBS Industries by part number. Tell us the part number from this page and the model of your Armstrong pump, and we will confirm the part and arrange supply.
You can also browse these Armstrong pages:
- Armstrong Pumps
- Armstrong Pump Mechanical Seals
- Armstrong Pump Seal Kits
- Armstrong Pump Shaft Sleeves
- Armstrong Pump Seal Chamber Bushings
- Armstrong Pump O-Rings
- Armstrong Pump Casing Gaskets
- Armstrong Pump Oil Seals
- Armstrong Pump Water Slingers
- Armstrong Pump Impeller Washers
- Armstrong Pump Impeller Cap Screws
- Mechanical Seals
Contact KBS Industries for help finding the right part for your pump.
We list each bearing by its Armstrong part number, so you can match it exactly.
