Myers Aplex Valves
Myers Aplex valves are the check valves inside Myers Aplex plunger pumps — one suction valve and one discharge valve per cylinder — and this page lists all 85 genuine Myers Aplex valve assemblies from the official Pentair catalog, by valve series, with part numbers. Match the part number on your old valve to find the right replacement for your MA or SC pump.
10 Series disc valve ss
TS10-SDO-ACO695
10 Series ball valve
TS10-SBO-ACO729
12 Series abrasion resistant valve
TS12-AR0-AC0848
12 Series dsg valve ss polyurethane o-ring
TS12-SG0-AC0545
12 Series dsg valve ss ptfe coating o-ring
TS12-SG0-AC0952
12 Series dsg valve ss no o-ring
TS12-SG0-AC0677
12 Series dsg valve ss no o-ring (lite spring)
TS12-SG1-AC0991
12 Series disc valve ss sd0
TS12-SD0-AC0660
12 Series disc valve titanium – td0
TS12-TD0-AC1045
15 Series abrasion resistant valve suction
TS15-AR0-AC0718
15 Series abrasion resistant valve discharge
TS15-AR0-AC0719
15 Series dsg valve ss polyurethane o-ring suction
TS15-SG0-AC0490
15 Series dsg valve ss polyurethane o-ring discharge
TS15-SG0-AC0735
15 Series dsg valve ss fluoroelastomer o-rings suction
TS15-SG0-AC1053
15 Series dsg valve ss fluoroelastomer o-rings discharge
TS15-SG0-AC1054
15 Series dsg valve ss no o-ring suction
TS15-SG0-AC0694
15 Series dsg valve ss no o-ring discharge
TS15-SG0-AC1057
15 Series disc valve ss sd0 suction
TS15-SD0-AC0424
15 Series disc valve ss sd0 discharge
TS15-SD0-AC0665
15 Series disc valve ss thick disc suction
TS15-SD0-AC0394
15 Series disc valve ss thick disc discharge
TS15-SD0-AC0679
15 Series disc valve acetal cd0 suction
TS15-CD0-AC0423
15 Series disc valve acetal cd0 discharge
TS15-CD0-AC0664
15 Series disc valve titanium (lite spring) suction
TS15-TD1-AC0982
15 Series disc valve titanium (lite spring) discharge
TS15-TD1-AC0983
18 Series abrasion resistant valve suction
TS18-AR0-AC0714
18 Series abrasion resistant valve discharge
TS18-AR0-AC0715
18 Series dsg valve ss polyurethane o-ring suction
TS18-SG0-AC0478
18 Series dsg valve ss polyurethane o-ring discharge
TS18-SG0-AC0720
18 Series dsg valve ss heavy spring suction
TS18-SG0-AC0824
18 Series disc valve ss sd0 suction
TS18-SD0-AC0285
18 Series disc valve ss sd0 discharge
TS18-SD0-AC0819
18 Series disc valve titanium – td0 suction
TS18-TD0-AC1075
18 Series disc valve titanium – td0 discharge
TS18-TD0-AC1076
18 Series disc valve acetal w/ 2205 seat suction
TS18-CD0-AC0998
18 Series disc valve acetal w/ 2205 seat discharge
TS18-CD0-AC0999
18 Series disc valve acetal cd0 suction
TS18-CD0-AC0284
18 Series disc valve acetal cd0 discharge
TS18-CD0-AC0820
20 Series abrasion resistant valve suction
TS20-AR0-AC0716
20 Series abrasion resistant valve discharge
TS20-AR0-AC0717
20 Series dsg valve ss polyurethane o-ring suction
TS20-SG0-0510
20 Series dsg valve ss polyurethane o-ring discharge
TS20-SG0-0511
20 Series disc valve ss sd0 suction
TS20-SD0-AC0330
20 Series disc valve ss sd0 discharge
TS20-SD0-AC0331
20 Series disc valve ss (lite spring) suction
TS20-SD1-AC0927
20 Series disc valve titanium – td0 suction
TS20-TD0-AC0171
20 Series disc valve titanium – td0 discharge
TS20-TD0-AC0172
20 Series disc valve acetal cd0 suction
TS20-CD0-AC0103
20 Series disc valve acetal cd0 discharge
TS20-CD0-AC0104
20 Series disc valve titanium (lite spring) suction
TS20-TD1-AC0173
20 Series disc valve titanium (lite spring) discharge
TS20-TD1-AC0174
25 Series abrasion resistant valve suction
TS25-AR0-AC0792
25 Series abrasion resistant valve discharge
TS25-AR0-AC0793
25 Series disc valve ss sd0 suction
TS25-SD0-AC0672
25 Series disc valve ss sd0 discharge
TS25-SD0-AC0673
25 Series disc valve titanium – td0 suction
TS25-TD0-AC0237
25 Series disc valve titanium – td0 discharge
TS25-TD0-AC0238
25 Series disc valve acetal cd0 suction
TS25-CDO-ACO194
25 Series disc valve acetal cd0 discharge
TS25-CDO-ACO195
30 Series abrasion resistant valve suction
TS30-AR0-AC0795
30 Series abrasion resistant valve discharge
TS30-AR0-AC0798
30 Series dsg valve ss (lite spring) suction
TS30-SD1-AC0877
30 Series dsg valve ss (lite spring) discharge
TS30-SD1-AC0878
30 Series disc valve ss sd0 suction
TS30-SD0-AC0539
30 Series disc valve ss sd0 discharge
TS30-SD0-AC0540
30 Series disc valve titanium – td0 suction
TS30-TD0-AC0253
30 Series disc valve titanium – td0 discharge
TS30-TD0-AC0252
30 Series disc valve acetal cd0 suction
TS30-CD0-AC0158
30 Series disc valve acetal cd0 discharge
TS30-CD0-AC0157
30 Series disc valve acetal (x-hvy) suction
TS30-CD0-AC0607
30 Series disc valve acetal (x-hvy) discharge
TS30-CD0-AC0606
30 Series disc valve ss (x-hvy) suction
TS30-SD2-AC0972
30 Series disc valve ss (x-hvy) discharge
TS30-SD2-AC0973
30 Series abrasion resistant valve suction
TS30-AR0-AC0722
30 Series abrasion resistant valve discharge
TS30-AR0-AC0721
32 Series abrasion resistant valve suction
TS32-AR0-AC0730
32 Series abrasion resistant valve discharge
TS32-AR0-AC0731
32 Series disc valve ss sd0 suction
TS32-SD0-AC0812
32 Series disc valve ss sd0 discharge
TS32-SD0-AC0813
32 Series disc valve titanium – td0 suction
TS32-TD0-AC0241
32 Series disc valve titanium – td0 discharge
TS32-TD0-AC0242
32 Series disc valve acetal cd0 suction
TS32-CD0-AC0159
32 Series disc valve acetal cd0 discharge
TS32-CD0-AC0160
35 Series abrasion resistant valve suction
TS35-AR0-AC0882
35 Series abrasion resistant valve discharge
TS35-AR0-AC0883
What Myers Aplex Valves Do
Every Myers Aplex plunger pump moves liquid with a set of check valves. On the suction stroke the suction valve opens and the cylinder fills; on the discharge stroke it closes and the discharge valve opens to push the liquid out. The valves are the parts that take the most wear in the fluid end because they open and close on every stroke, in direct contact with whatever the pump is moving.
Myers Aplex builds these valves in several types for different service: disc valves in stainless steel, acetal and titanium, dual stem guided valves in stainless steel, and abrasion resistant valves for slurry and gritty liquids. The right valve depends on the liquid, the pressure and the temperature — the catalog’s application chart rates acetal disc valves to 2,000 psi and 120°F for clean cool liquids and sea or fresh water, while stainless disc valves go to 5,000 psi and 250°F for amine, crude oil and hot liquids.
Signs a Myers Aplex Valve Needs Replacing
A worn valve usually shows up as lost performance before it fails outright. Watch for falling flow or pressure at the same speed, pressure that will not hold when the pump stops, a pump that loses prime, or chatter and knocking from the fluid end. A valve that leaks back lets liquid slip past on each stroke, so the pump works harder for less output.
In abrasive service the valve disc and seat wear fastest, and a scored seat will keep leaking even with a new disc, which is why complete valve assemblies are often the better repair. If the pump has been run dry or cavitated, check the valves first — cavitation shortens the life of every valve type, and the damage is usually visible as pitting on the disc and seat.
How to Choose the Right Myers Aplex Valve
Start with the pump model and the valve series. Each series on this page fits a set of MA and SC pump models, and suction and discharge valves are different part numbers, so check which side you need before ordering. Then match the valve type to the liquid: acetal disc valves suit clean cool liquids and reverse osmosis water; stainless disc valves suit hot liquids, crude oil and amine; dual stem guided valves suit water with abrasive content; abrasion resistant valves suit slurries and solutions carrying grit. Temperature matters too —
Polyurethane inserts are limited to 160°F, so hotter service needs a different insert material. Spring weight matters as well: standard, lite and heavy springs change how the valve opens, and fitting the wrong spring can cause chatter or slow closing. When in doubt, match the part number on the old valve — every assembly on this page carries its Pentair Myers TS number.
Myers Aplex Valves: What Fits Your Pump
The 85 assemblies on this page cover the full Myers Aplex range, from the small 10 Series for MA-15 and SC-30 pumps up to the 35 Series for the SC170DD. The 15 Series is the widest used, fitting SC-35, SC-45, SC-65H, SC-80 and SC-115H among others, while the 20 Series covers the larger SC-65L, SC-95, SC-115L and SC-170H. The 30 Series serves the big low-speed models — MA-95L, MA-120L, MA-240L and SC-170L — and the SC-300L has its own two assemblies in the 30 Series. Each card states the series, the valve type, suction or discharge, and the part number, so you can confirm the match before you order.
Myers Aplex Valves at KBS Industries
KBS Industries lists genuine Myers Aplex valves with their Pentair part numbers so you can order by the number on your old valve. Every assembly here comes from the official Pentair Myers Aplex expendable parts catalog, not an aftermarket copy. If you are rebuilding a fluid end, pair the valves with the matching valve parts, plungers and packing from the other pages in this section — a fresh valve on a worn seat, or a new plunger with tired packing, will not hold pressure the way a full set will.
Browse More Myers Aplex Parts
You can find the full range on our Aplex Myers Pump and parts hub page, or go straight to the other sections: Myers Aplex Valve Parts, Myers Aplex Plungers, Myers Aplex Packing and Myers Aplex Tools. For the manufacturer’s own documentation, see Pentair Myers.
Myers Aplex Valves for Every Pump Model
Myers Aplex valves fit MA and SC plunger pumps across the whole range. When you order Myers Aplex valves, match the series and the suction or discharge side first, then check the valve type and spring. Genuine Myers Aplex valves carry a Pentair TS part number, so the number on your old valve is the surest match for the Myers Aplex valves you need.
If you run more than one pump, keeping a spare set of Myers Aplex valves on the shelf cuts downtime. Myers Aplex valves wear fastest in abrasive service, so pumps moving slurry or gritty liquid need their Myers Aplex valves checked at every service interval.
Contact KBS Industries for help choosing Myers Aplex valves for your pump. Tell us the pump model and the part number on the old valve, and we will confirm the Myers Aplex valves that fit before you order.
When you need Myers Aplex valves, order by part number and double-check the series before you fit them. Myers Aplex valves are genuine Pentair parts, and the right Myers Aplex valves will restore flow and pressure to your pump. If a valve you need is not listed here, contact KBS Industries — we can check the full Myers Aplex valves range for you.
