Armstrong Pump Impeller Washers
Armstrong Pump Impeller Washers: Browse our Armstrong Pump Impeller Washers below. The list covers 2 genuine Armstrong Pump Impeller Washers, shown with their part numbers, for Armstrong pumps. Every part is a genuine Armstrong spare, supplied by KBS Industries. Check the part number on the washer you are replacing before you order, and contact KBS Industries if you need help finding the right part for your pump.
Stainless Steel Impeller Washer, S Model
425742-001
Stainless Steel Impeller Washer, M Model
425742-003
The two washers above are the Armstrong pump impeller washers we list at KBS Industries. Both are stainless steel impeller washers for Armstrong 4030, 4280 and 4380 pumps, one for S model pumps and one for M model pumps. No picture is shown for these washers yet, because no Armstrong impeller washer picture is held on this site. The part number is the reliable way to identify the washer you need, so please match it exactly to the washer removed from your pump.
How to Choose Armstrong Pump Impeller Washers
To choose the right Armstrong Pump Impeller Washers for your pump, start with the part number on the washer you are replacing. That number is printed on the packaging or listed in the pump parts list, and it is the surest match.
Next, check the pump model and whether it is an S model or an M model, because Armstrong 4030, 4280 and 4380 pumps use different impeller washers for S and M models. A washer that looks the same but carries a different part number may not fit your pump, so do not guess from appearance alone.
- Match the full part number exactly, including every digit and hyphen.
- Check the Armstrong pump model and whether it is an S or M model before you order.
- Check the washer size against the old impeller washer.
- Keep the old washer until the new one is fitted, so the numbers can be checked again.
- Ask KBS Industries for help if the part number is worn, damaged or hard to read.
Armstrong Pump Impeller Washers: Fitment Notes
Armstrong pump impeller washers sit under the impeller cap screw and spread its load, so a worn or missing washer can let the impeller work loose. If a pump impeller is loose, or the washer is thin, bent or cracked, the washer is one of the first parts to check.
When you fit a new washer, keep it clean and dry, check the impeller and the cap screw for wear, and follow the pump maker fitting guidance for the model you have. Fit the washer the right way round, and do not reuse a washer that has been removed with force.
A washer is a simple part, but it must match the pump model and the S or M version exactly, because the impeller and the cap screw differ between models. Stainless steel washers resist rust in the pump, so do not replace one with a plain steel washer.
The washers listed on this page are genuine Armstrong spares, and each one is listed by its Armstrong part number only, with no price and no cart on this page. For a price and for availability, contact KBS Industries with the part number and your pump model, and we will help you confirm the right washer. You can also check pump model information on the Armstrong Fluid Technology website.
Order Armstrong Pump Impeller Washers from KBS Industries
Order Armstrong Pump Impeller Washers from KBS Industries by part number. Tell us the part number from this page and the model of your Armstrong pump, and we will confirm the part and arrange supply.
You can also browse these Armstrong pages:
- Armstrong Pumps
- Armstrong Pump Mechanical Seals
- Armstrong Pump Bearings
- Armstrong Pump Seal Kits
- Armstrong Pump Shaft Sleeves
- Armstrong Pump Seal Chamber Bushings
- Armstrong Pump O-Rings
- Armstrong Pump Casing Gaskets
- Armstrong Pump Oil Seals
- Armstrong Pump Water Slingers
- Armstrong Pump Impeller Cap Screws
- Mechanical Seals
Contact KBS Industries for help finding the right part for your pump.
We list each washer by its Armstrong part number, so you can match it exactly.
