Wednesday, November 18, 2026

Armstrong Pump Seal Chamber Bushings

Armstrong Pump Seal Chamber Bushings: Browse our Armstrong Pump Seal Chamber Bushings below. The list covers 4 genuine Armstrong Pump Seal Chamber Bushings, shown with their part numbers, for Armstrong pumps. Every part is a genuine Armstrong spare, supplied by KBS Industries. Check the part number on the bushing you are replacing before you order, and contact KBS Industries if you need help finding the right part for your pump.

No picture

Seal Chamber Bushing, Carbon, 1.625 in.
425520-001

No picture

Seal Chamber Bushing, Carbon, 1.125 in.
425520-002

No picture

Seal Chamber Bushing, Carbon, 2.125 in.
425520-003

No picture

Seal Chamber Bushing, Carbon, 0.750 in.
425520-008

The four bushings above are the Armstrong pump seal chamber bushings we list at KBS Industries. Each one is a carbon seal chamber bushing for Armstrong 4300, 4302 and 4312 pumps, for an outside balanced seal. No picture is shown for these bushings yet, because no Armstrong seal chamber bushing picture is held on this site. The part number is the reliable way to identify the bushing you need, so please match it exactly to the bushing removed from your pump.

How to Choose Armstrong Pump Seal Chamber Bushings

To choose the right Armstrong Pump Seal Chamber Bushings for your pump, start with the part number on the bushing you are replacing. That number is printed on the bushing or listed in the pump parts list, and it is the surest match.

Next, check the pump model and the shaft size, because different Armstrong pump models use different bushings. A bushing that looks the same but carries a different part number may not fit your pump, so do not guess from appearance alone.

  • Match the full part number exactly, including every digit and hyphen.
  • Check the Armstrong pump model and the shaft size before you order.
  • Check the frame size and pump group for your 4300, 4302 or 4312 pump.
  • Keep the old bushing until the new one is fitted, so the numbers can be checked again.
  • Ask KBS Industries for help if the part number is worn, damaged or hard to read.

Armstrong Pump Seal Chamber Bushings: Fitment Notes

Armstrong pump seal chamber bushings sit in the seal chamber of 4300, 4302 and 4312 pumps, with an outside balanced seal. A worn bushing can cause leaking and damage to a new seal, so check the bushing when a seal is replaced.

When you fit a new bushing, keep it clean and dry, check the seal chamber for wear, and follow the pump maker fitting guidance for the model you have. Do not fit a new seal with a worn bushing, and do not reuse a bushing that has been removed with force.

The bushings listed on this page are genuine Armstrong spares, and each one is listed by its Armstrong part number only, with no price and no cart on this page. For a price and for availability, contact KBS Industries with the part number and your pump model, and we will help you confirm the right bushing. You can also check pump model information on the Armstrong Fluid Technology website.

Order Armstrong Pump Seal Chamber Bushings from KBS Industries

Order Armstrong Pump Seal Chamber Bushings from KBS Industries by part number. Tell us the part number from this page and the model of your Armstrong pump, and we will confirm the part and arrange supply.

You can also browse these Armstrong pages:

Contact KBS Industries for help finding the right part for your pump.

We list each bushing by its Armstrong part number, so you can match it exactly.