Armstrong Pump O-Rings
Armstrong Pump O-Rings: Browse our Armstrong Pump O-Rings below. The list covers 5 genuine Armstrong Pump O-Rings, shown with their part numbers, for Armstrong pumps. Every part is a genuine Armstrong spare, supplied by KBS Industries. Check the part number on the O-ring you are replacing before you order, and contact KBS Industries if you need help finding the right part for your pump.
O-Ring for Armstrong Pumps
961111-131
O-Ring for Armstrong Pumps
961131-115
O-Ring for Armstrong Pumps
AS1270-375
Casing O-Ring for Armstrong Pumps
961180-384
Casing O-Ring for Armstrong Pumps
961180-386
The five O-rings above are the Armstrong pump O-rings we list at KBS Industries. Two of them are casing O-rings, and the other three are O-rings for Armstrong pumps. No picture is shown for these O-rings yet, because no Armstrong O-ring picture is held on this site. The part number is the reliable way to identify the O-ring you need, so please match it exactly to the O-ring removed from your pump.
How to Choose Armstrong Pump O-Rings
To choose the right Armstrong Pump O-Rings for your pump, start with the part number on the O-ring you are replacing. That number is printed on the packaging or listed in the pump parts list, and it is the surest match.
Next, check the pump model and the place where the O-ring sits, because different Armstrong pump models use different O-rings. An O-ring that looks the same but carries a different part number may not seal your pump, so do not guess from appearance alone.
- Match the full part number exactly, including every digit and hyphen.
- Check the Armstrong pump model and the O-ring position before you order.
- Check whether you need a casing O-ring or another O-ring in the pump.
- Keep the old O-ring until the new one is fitted, so the numbers can be checked again.
- Ask KBS Industries for help if the part number is worn, damaged or hard to read.
Armstrong Pump O-Rings: Fitment Notes
Armstrong pump O-rings seal joints and covers in the pump, so a worn O-ring can cause leaking and loss of pressure. If a pump leaks at a joint or a cover, or an O-ring is flat, hard or cut, the O-ring is one of the first parts to check.
When you fit a new O-ring, keep it clean and dry, check the groove for dirt and damage, and follow the pump maker fitting guidance for the model you have. Do not stretch an O-ring more than needed, and do not reuse an O-ring that has been removed.
The O-rings listed on this page are genuine Armstrong spares, and each one is listed by its Armstrong part number only, with no price and no cart on this page. For a price and for availability, contact KBS Industries with the part number and your pump model, and we will help you confirm the right O-ring. You can also check pump model information on the Armstrong Fluid Technology website.
Order Armstrong Pump O-Rings from KBS Industries
Order Armstrong Pump O-Rings from KBS Industries by part number. Tell us the part number from this page and the model of your Armstrong pump, and we will confirm the part and arrange supply.
You can also browse these Armstrong pages:
- Armstrong Pumps
- Armstrong Pump Mechanical Seals
- Armstrong Pump Bearings
- Armstrong Pump Seal Kits
- Armstrong Pump Shaft Sleeves
- Armstrong Pump Seal Chamber Bushings
- Armstrong Pump Casing Gaskets
- Armstrong Pump Oil Seals
- Armstrong Pump Water Slingers
- Armstrong Pump Impeller Washers
- Armstrong Pump Impeller Cap Screws
- Mechanical Seals
Contact KBS Industries for help finding the right part for your pump.
We list each O-ring by its Armstrong part number, so you can match it exactly.
