A-C Pump Shaft Sleeves
A-C Pump Shaft Sleeves: this page lists the 4 genuine A-C Pump shaft sleeves that KBS Industries carries for A-C (Allis Chalmers) pumps, shown with part numbers below.
A shaft sleeve is a tube that fits over the pump shaft where it passes through the packing. It protects the shaft from wear and gives the packing a smooth surface to seal against.
Use the part numbers below to match the sleeve to your pump before you order, and contact KBS Industries if you need help finding the right part. For the full A-C Pump range, start from our A-C Pump hub page.
A-C Pump Shaft Sleeve
52-118-010-002
Brass shaft sleeve for A-C pumps, 1.000 x 1.250 x 3.110 inches (OEM reference AC0603). It covers and protects the shaft where it passes through the packing.
A-C Pump Shaft Sleeve
52-118-013-002
Bronze shaft sleeve for A-C pumps, 1.375 x 1.625 x 3.675 inches (OEM reference AC0607). It covers and protects the shaft where it passes through the packing.
A-C Pump Shaft Sleeve
52-118-020-002
Brass shaft sleeve for A-C pumps, 1.000 x 1.250 x 4.700 inches (OEM reference AC0611). It covers and protects the shaft where it passes through the packing.
A-C Pump Shaft Sleeve
52-118-021-002
Bronze shaft sleeve for A-C pumps, 1.375 x 1.625 x 4.435 inches (OEM reference AC0613). It covers and protects the shaft where it passes through the packing.
What Are A-C Pump Shaft Sleeves?
A-C Pump Shaft Sleeves are metal tubes that slide over the pump shaft in the stuffing box area. The packing rings press against the sleeve, not the shaft itself, so the sleeve takes the wear and the shaft stays protected.
When a sleeve gets scored or worn thin, the packing cannot seal well and the pump starts to leak. A new sleeve gives the packing a smooth surface again and is far cheaper than replacing the shaft.
The sleeves listed here are made from brass or bronze. The part number is the surest way to match a sleeve: sizes differ from one pump model to another, and a sleeve that looks close can still be the wrong size. Check the shaft size and the sleeve length before you order.
Check the part number on the old sleeve or on the pump nameplate, then match it to the numbers listed on this page. KBS Industries supplies genuine A-C parts made to the original size and material. If your pump also needs other parts, see our A-C Pump Packing Rings, A-C Pump Lantern Rings, A-C Pump Mechanical Seals and A-C Pump Minor Repair Kits pages.
How to Choose A-C Pump Shaft Sleeves
- Match the part number to your pump model before you order. The numbers on this page are 52-118-010-002, 52-118-013-002, 52-118-020-002 and 52-118-021-002.
- Check the shaft size and the sleeve length. The sleeve must slide onto the shaft snugly and span the full stuffing box.
- Note the material. Two sleeves here are brass and two are bronze, so match the material your pump was built with.
- Check the old sleeve for scoring before you fit a new one. A scored shaft under the sleeve can still leak.
- Fit new packing with a new sleeve. Old packing has worn to the old sleeve and will not seal well on a new surface.
- Keep a spare sleeve on site. Shaft sleeves are small parts, and having one ready avoids downtime.
- Not sure which part fits your pump? Email sales@kbsindustries.com with your pump model and part number.
Order A-C Pump Shaft Sleeves from KBS Industries
To order A-C Pump Shaft Sleeves, email sales@kbsindustries.com with your pump model and the part number, or start from our A-C Pump hub.
For related A-C parts, see A-C Pump Mechanical Seals, A-C Pump Replacement Seal Kits, A-C Pump Minor Repair Kits, A-C Pump Lantern Rings, A-C Pump Casing Gaskets and A-C Pump Packing Rings. A-C Pump is a Xylem brand — see the Xylem site for more on the brand. KBS Industries supplies genuine A-C Pump parts for Allis Chalmers pumps, and we can help you match the right part to your pump.
