A-C Pump Packing Rings
A-C Pump Packing Rings: this page lists the 2 genuine A-C Pump packing rings that KBS Industries carries for A-C (Allis Chalmers) pumps, shown with part numbers below.
A packing ring sits in the stuffing box around the shaft. It presses against the shaft and the stuffing box wall to stop liquid from leaking out along the shaft, while still letting the shaft turn.
Use the part numbers below to match the ring to your pump before you order, and contact KBS Industries if you need help finding the right part. For the full A-C Pump range, start from our A-C Pump hub page.
A-C Pump Packing Ring
52-328-740-111
PTFE graphite packing ring for A-C pumps (OEM reference AC6128). It seals the shaft in the stuffing box and can be fitted without taking the pump apart.
A-C Pump Packing Ring
52-328-740-241
PTFE graphite packing ring for A-C pumps (OEM reference AC6130). It seals the shaft in the stuffing box and can be fitted without taking the pump apart.
What Are A-C Pump Packing Rings?
A-C Pump Packing Rings are molded rings that fit into the stuffing box of an A-C pump, around the shaft. Several rings are stacked in the box and squeezed by the gland, so they press against the shaft and seal it.
The rings listed here are made from PTFE graphite. That material slides easily on the shaft, stands up to heat and chemicals, and seals well with little wear on the shaft or sleeve.
Packing rings wear down over time, and a pump that drips more than it should often needs new rings. The part number is the surest way to match a ring: sizes differ from one pump model to another, and a ring that looks close can still be the wrong size.
Check the part number on the old ring or on the pump nameplate, then match it to the numbers listed on this page. KBS Industries supplies genuine A-C parts made to the original size and material. If your pump also needs other parts, see our A-C Pump Lantern Rings, A-C Pump Shaft Sleeves, A-C Pump Mechanical Seals and A-C Pump Minor Repair Kits pages.
How to Choose A-C Pump Packing Rings
- Match the part number to your pump model before you order. The numbers on this page are 52-328-740-111 and 52-328-740-241.
- Check the shaft size and the stuffing box bore. The ring must fit the shaft snugly and fill the box without gaps.
- Count how many rings your stuffing box takes, and order enough for the full set.
- Stagger the ring joints when you fit them. Line the joints up at different points around the shaft so liquid cannot leak straight through.
- Do not over-tighten the gland. The gland should be snug enough to control the leak, with a small drip to cool and lubricate the packing.
- Keep spare rings on site. Packing rings are small, low cost parts, and having them ready avoids downtime.
- Not sure which part fits your pump? Email sales@kbsindustries.com with your pump model and part number.
Order A-C Pump Packing Rings from KBS Industries
To order A-C Pump Packing Rings, email sales@kbsindustries.com with your pump model and the part number, or start from our A-C Pump hub.
For related A-C parts, see A-C Pump Mechanical Seals, A-C Pump Replacement Seal Kits, A-C Pump Minor Repair Kits, A-C Pump Lantern Rings, A-C Pump Shaft Sleeves and A-C Pump Casing Gaskets. A-C Pump is a Xylem brand — see the Xylem site for more on the brand. KBS Industries supplies genuine A-C Pump parts for Allis Chalmers pumps, and we can help you match the right part to your pump.
