Wednesday, November 18, 2026

Armstrong Pump Water Slingers

Armstrong Pump Water Slingers: Browse our Armstrong Pump Water Slingers below. The list covers 2 genuine Armstrong Pump Water Slingers, shown with their part numbers, for Armstrong pumps. Every part is a genuine Armstrong spare, supplied by KBS Industries. Check the part number on the water slinger you are replacing before you order, and contact KBS Industries if you need help finding the right part for your pump.

No picture

Water Slinger for Armstrong 4030, 4280 and 4380 S Pumps
406622-000

No picture

Water Slinger for Armstrong 4030, 4280 and 4380 M Pumps
419315-000

The two water slingers above are the Armstrong pump water slingers we list at KBS Industries. One is for S model pumps, and the other is for M model pumps, both for Armstrong 4030, 4280 and 4380 pumps. No picture is shown for these water slingers yet, because no Armstrong water slinger picture is held on this site. The part number is the reliable way to identify the water slinger you need, so please match it exactly to the water slinger removed from your pump.

How to Choose Armstrong Pump Water Slingers

To choose the right Armstrong Pump Water Slingers for your pump, start with the part number on the water slinger you are replacing. That number is printed on the packaging or listed in the pump parts list, and it is the surest match.

Next, check the pump model and whether it is an S model or an M model, because Armstrong 4030, 4280 and 4380 pumps use different water slingers for S and M models. A water slinger that looks the same but carries a different part number may not fit your pump, so do not guess from appearance alone.

  • Match the full part number exactly, including every digit and hyphen.
  • Check the Armstrong pump model and whether it is an S or M model before you order.
  • Check the water slinger size against the old water slinger.
  • Keep the old water slinger until the new one is fitted, so the numbers can be checked again.
  • Ask KBS Industries for help if the part number is worn, damaged or hard to read.

Armstrong Pump Water Slingers: Fitment Notes

Armstrong pump water slingers sit on the shaft and throw water away from the bearing, so a worn or missing water slinger can let water reach the bearing and cause damage. If a pump bearing fails early, or water is found near the bearing, the water slinger is one of the first parts to check.

When you fit a new water slinger, keep it clean and dry, check the shaft for wear, and follow the pump maker fitting guidance for the model you have. Fit the slinger the right way round, and do not reuse a water slinger that has been removed with force.

A water slinger is a simple part, but it must match the pump model and the S or M version exactly, because the shaft and the bearing housing differ between models. If the wrong slinger is fitted, it may rub, or it may not throw water clear of the bearing.

The water slingers listed on this page are genuine Armstrong spares, and each one is listed by its Armstrong part number only, with no price and no cart on this page. For a price and for availability, contact KBS Industries with the part number and your pump model, and we will help you confirm the right water slinger. You can also check pump model information on the Armstrong Fluid Technology website.

Order Armstrong Pump Water Slingers from KBS Industries

Order Armstrong Pump Water Slingers from KBS Industries by part number. Tell us the part number from this page and the model of your Armstrong pump, and we will confirm the part and arrange supply.

You can also browse these Armstrong pages:

Contact KBS Industries for help finding the right part for your pump.

We list each water slinger by its Armstrong part number, so you can match it exactly.