Armstrong Pump Impeller Cap Screws
Armstrong Pump Impeller Cap Screws: Browse our Armstrong Pump Impeller Cap Screws below. The list covers 2 genuine Armstrong Pump Impeller Cap Screws, shown with their part numbers, for Armstrong pumps. Every part is a genuine Armstrong spare, supplied by KBS Industries. Check the part number on the cap screw you are replacing before you order, and contact KBS Industries if you need help finding the right part for your pump.
Stainless Steel Impeller Cap Screw, S Model
911900-114
Stainless Steel Impeller Cap Screw
911900-119
The two cap screws above are the Armstrong pump impeller cap screws we list at KBS Industries. Both are stainless steel impeller cap screws for Armstrong 4030, 4280 and 4380 pumps, and one is for S model pumps. No picture is shown for these cap screws yet, because no Armstrong impeller cap screw picture is held on this site. The part number is the reliable way to identify the cap screw you need, so please match it exactly to the cap screw removed from your pump.
How to Choose Armstrong Pump Impeller Cap Screws
To choose the right Armstrong Pump Impeller Cap Screws for your pump, start with the part number on the cap screw you are replacing. That number is printed on the packaging or listed in the pump parts list, and it is the surest match.
Next, check the pump model and whether it is an S model or an M model, because Armstrong 4030, 4280 and 4380 pumps use different impeller cap screws for S and M models. A cap screw that looks the same but carries a different part number may not fit your pump, so do not guess from appearance alone.
- Match the full part number exactly, including every digit and hyphen.
- Check the Armstrong pump model and whether it is an S or M model before you order.
- Check the cap screw size and thread against the old impeller cap screw.
- Keep the old cap screw until the new one is fitted, so the numbers can be checked again.
- Ask KBS Industries for help if the part number is worn, damaged or hard to read.
Armstrong Pump Impeller Cap Screws: Fitment Notes
Armstrong pump impeller cap screws hold the impeller on the shaft, so a worn or damaged cap screw can let the impeller work loose. If a pump impeller is loose, or the cap screw is rusted, stripped or cracked, the cap screw is one of the first parts to check.
When you fit a new cap screw, keep it clean and dry, check the impeller washer and the shaft thread for wear, and follow the pump maker fitting guidance for the model you have. Tighten the cap screw to the torque given for your pump, and do not reuse a cap screw that has been stripped.
A cap screw is a small part, but it must match the pump model and the S or M version exactly, because the impeller and the shaft differ between models. Stainless steel cap screws resist rust in the pump, so do not replace one with a plain steel cap screw.
The cap screws listed on this page are genuine Armstrong spares, and each one is listed by its Armstrong part number only, with no price and no cart on this page. For a price and for availability, contact KBS Industries with the part number and your pump model, and we will help you confirm the right cap screw. You can also check pump model information on the Armstrong Fluid Technology website.
Order Armstrong Pump Impeller Cap Screws from KBS Industries
Order Armstrong Pump Impeller Cap Screws from KBS Industries by part number. Tell us the part number from this page and the model of your Armstrong pump, and we will confirm the part and arrange supply.
You can also browse these Armstrong pages:
- Armstrong Pumps
- Armstrong Pump Mechanical Seals
- Armstrong Pump Bearings
- Armstrong Pump Seal Kits
- Armstrong Pump Shaft Sleeves
- Armstrong Pump Seal Chamber Bushings
- Armstrong Pump O-Rings
- Armstrong Pump Casing Gaskets
- Armstrong Pump Oil Seals
- Armstrong Pump Water Slingers
- Armstrong Pump Impeller Washers
- Mechanical Seals
Contact KBS Industries for help finding the right part for your pump.
We list each cap screw by its Armstrong part number, so you can match it exactly.
