Eaton Electric Common Components
Eaton Electric Common Components: this page lists the 48 genuine Eaton parts that KBS Industries carries for Eaton electric fire pump controllers, shown with their Eaton part numbers below.
These Eaton Electric Common Components are shared across Eaton electric fire pump controllers, whatever the controller series. They cover the incoming power path, the short circuit and overload protection, surge protection and the soft start equipment that brings the fire pump motor up to speed without a damaging inrush of current. Because the same parts fit more than one controller range, they are the items most often needed when a controller is serviced, repaired or kept as a spare.
Use the Eaton part number below to match the component to your controller before you order, and contact KBS Industries if you need help finding the right part. For the full Eaton fire pump range, start from our Eaton Fire Pump Control Spares hub page.
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| FDN 150A | FD3150KW | KDN 400A (does not include lugs) | KD3400NW |
| LDN 600A (does not include lugs) | LD3600NW | 150A lugs for FDN, #6-300MCM, 1 per phase, set of 3 | 3TA225FDK |
| 300A lugs for KDN, #3-350MCM, 1 per phase, single lug | TA300K | 400A lugs for KDN, 3/0-250MCM, 2 per phase, set of 3 | 3TA400K |
| 600A lugs for LDN, 250-350MCM, 2 per phase, single lug | TA602LD |
Limited service circuit breaker
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 15A, 3-pole 3-Phase | HFD3015 | 20A, 3-pole 3-Phase | HFD3020 |
| 30A, 3-pole 3-Phase | HFD3030 | 50A, 3-pole 3-Phase | HFD3050 |
| 70A, 3-pole 3-Phase | HFD3070 | 100A, 3-pole 3-Phase | HFD3100 |
| 150A, 3-pole 3-Phase | HFD3150 |
Circuit breaker
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| HMCP 15A | 3A16272G73 | HMCP 30A | 3A16272G74 |
| HMCP 50A | 3A16272G75 | HMCP 100A | 3A16272G76 |
| HMCP 150A Trip 450-1500A | HMCP150T4C | HMCP 150A Trip 750-2500A | HMCP150U4C |
| HMCP 400A Trip 1250-2500A | HMCP400W5W | HMCP 400A Trip 1500-3000A | HMCP400N5W |
| HMCP 400A Trip 2000-4000A | HMCP400X5W | HMCP 600A | HMCP600L6W |
Surge Arrester
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Spade Terminals | CE16254G01 | Ring Terminals | CE16255G01 |
Miscellaneous
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Micro Switch (MSH) | E47BMS43 | Disconnect Handle | C371H1 |
| Main Door Handle | 349P236G01 | Externally Mounted USB Port | M22-USB-SA |
| Externally Mounted Ethernet Port | M22-RJ45-SA |
S611 soft start
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 52 Amp Soft Starter | S611A052N3S | 77 Amp Soft Starter | S611A077N3S |
| 125 Amp Soft Starter | S611B125N3S | 156 Amp Soft Starter | S611C156N3S |
| 180 Amp Soft Starter | S611C180N3S | 242 Amp Soft Starter | S611D242N3S |
| 300 Amp Soft Starter | S611E302N3S | 361 Amp Soft Starter | S611E361N3S |
| 414 Amp Soft Starter | S611F414N3S |
Tru-start soft start
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 15 Amp Soft Starter | TRU-015-FP | 30 Amp Soft Starter | TRU-030-FP |
| 50 Amp Soft Starter | TRU-050-FP | 80 Amp Soft Starter | TRU-080-FP |
| 125 Amp Soft Starter | TRU-125-FP | 200 Amp Soft Starter | TRU-200-FP |
| 360 Amp Soft Starter | TRU-360-FP | 500 Amp Soft Starter | TRU-500-FP |
What Are Eaton Electric Common Components?
Eaton Electric Common Components are the standard electrical parts fitted in Eaton electric fire pump controllers. The isolating switch disconnects the controller from the supply so it can be worked on safely, while the limited service circuit breaker and the HMCP motor circuit protectors guard the pump motor and its wiring against short circuits and overloads. Surge arresters protect the controller electronics from voltage spikes on the supply.
The soft starters among these Eaton Electric Common Components bring the motor up to speed in a controlled way. The S611 range covers motors from 52 to 414 amps, and the Tru-start range covers motors from 15 to 500 amps, so between them they suit most electric fire pump duties. Choosing the right starter size matters: a starter rated below the motor current will trip or fail, while one far above it costs more than the job needs.
Smaller parts matter just as much as the large ones. The micro switch, door handles, disconnect handle and the externally mounted USB and Ethernet ports are the items that wear, break or go missing during service. These Eaton Electric Common Components are listed here with their Eaton part numbers so a controller can be returned to full working order without replacing larger assemblies.
Every part on this page is a genuine Eaton part, supplied with its Eaton part number. Eaton builds its fire pump controllers to the standards fire protection systems depend on, and using the maker’s own components keeps the controller’s ratings and approvals intact. For the manufacturer’s own fire pump control range, see Eaton fire pump controls.
How to Choose Eaton Electric Common Components
- Match the Eaton part number to your controller model before you order. The numbers on this page are the surest way to identify the right Eaton Electric Common Components.
- Check the current rating of isolating switches, circuit breakers and soft starters against the motor full load current. A part rated below the motor current will not protect the circuit properly.
- Match the lugs to the switch frame. FDN, KDN and LDN switches use different lugs, and the lug size must suit the cable and the number of conductors per phase.
- Choose the HMCP trip range to suit the motor. The trip setting must sit above the motor starting current and below the level that would damage the wiring.
- Pick the surge arrester terminal type to match the wiring in your controller: spade terminals or ring terminals.
- Check the soft starter rating against the motor. S611 starters run from 52 to 414 amps and Tru-start starters from 15 to 500 amps.
- Not sure which part fits your controller? Email sales@kbsindustries.com with the controller model and the part you need.
Order Eaton Electric Common Components from KBS Industries
To order Eaton Electric Common Components, email sales@kbsindustries.com with the Eaton part numbers you need and the quantity for each. KBS Industries will confirm availability and delivery for your order.
For related Eaton parts, see Eaton Fire Pump Spares, and for the whole fire pump control range, return to the Eaton Fire Pump Control Spares hub page.
