Eaton EPCT Fire Transfer Switch Components
Eaton EPCT Fire Transfer Switch Components: this page lists the 11 genuine Eaton parts that KBS Industries carries for Eaton EPCT Fire transfer switch fire pump controllers. Every part is shown with its description and its Eaton part number, so you can match the component in your controller and order with confidence.
These Eaton EPCT Fire Transfer Switch Components are the parts that wear, fail or need replacing when EPCT Fire transfer switches are serviced — from the ATS I/O board and the stand-alone transformers to the relay and the transfer switches themselves. Each one is a genuine Eaton part, supplied exactly as Eaton lists it for the EPCT Fire transfer switch range.
Use the Eaton part number below to match the component to your controller before you order, and check the transformer voltage before you order a replacement. See the Eaton Fire Pump Control Spares hub page for the full list of Eaton spares, and for the other electric ranges, see Eaton Electric Common Components, Eaton A200 Series Components, Eaton Freedom Series Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton LMR Plus Components and Eaton EPCT Fire Components.
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Automatic Transfer Switch I/O Board | CE16260H03 |
Transformers (each)
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| ATS Stand Alone Transformers 208/120V 150VA | CE16489H01 | ATS Stand Alone Transformers 240/120V 150VA | CE16489H02 |
| ATS Stand Alone Transformers 380-415/120V 150VA | CE16489H03 | ATS Stand Alone Transformers 480/120V 150VA | CE16489H04 |
| ATS Stand Alone Transformers 600/120V 150VA | CE16489H05 |
Relay
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Relay (KV) | MSAA276396 |
Transfer switch
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 150 Amp Transfer Switch | FATS3150CN | 300 Amp Transfer Switch | FATS3300N |
| 400 Amp Transfer Switch | FATS3400CN | 600 Amp Transfer Switch | FATS3600CN |
What Are Eaton EPCT Fire Transfer Switch Components?
Eaton EPCT Fire Transfer Switch Components are the replacement parts for the automatic transfer switch used with Eaton’s EPCT Fire fire pump controllers. The transfer switch moves the pump’s power supply between the normal source and the emergency source, so the pump keeps running when the normal supply fails. Because the transfer switch is a safety-critical part of the installation, its spares cover the parts most often needed during servicing, from the ATS I/O board and transformers to the relay and the switches themselves.
In an Eaton EPCT Fire Transfer Switch Components installation, the ATS I/O board controls the transfer switch, reading the supply voltages and deciding when to change over. The stand-alone transformers step the supply voltage down for the control circuits, and each transformer is wound for a different supply voltage, so the part number must match the site supply. The KV relay monitors the supply, and the transfer switch itself carries the load current between the two sources.
The five transformers on this page are listed one per supply voltage: 208/120V, 240/120V, 380-415/120V, 480/120V and 600/120V, all rated 150VA. Check the supply voltage at your site before you order, because the transformers look alike but carry different part numbers. The 150, 300, 400 and 600 amp transfer switches are likewise listed separately, so match the switch rating to the pump motor’s full-load current.
Every one of these Eaton EPCT Fire Transfer Switch Components is a genuine Eaton part, supplied with its Eaton part number. Genuine parts keep the transfer switch’s ratings, connections and behaviour exactly as Eaton designed them, which matters in a fire pump application where the switch must change over first time, every time. For more background on Eaton’s fire pump range, see Eaton’s fire pump page.
How to Choose Eaton EPCT Fire Transfer Switch Components
Match the part to your controller before you order. The checks below cover the most common mistakes when ordering Eaton EPCT Fire Transfer Switch Components spares.
- Check the Eaton part number on the failed component or on your controller’s parts list — similar boards and switches are not interchangeable.
- Match the transformer to your site supply voltage: the 208/120V, 240/120V, 380-415/120V, 480/120V and 600/120V transformers carry different part numbers.
- Order the transfer switch by its amp rating: the 150, 300, 400 and 600 amp switches are different parts — note that the 300 amp switch is FATS3300N and the others end in CN.
- Check the ATS I/O board number: the EPCT Fire transfer switch board is CE16260H03.
- For the relay, order MSAA276396 — the KV relay used in the EPCT Fire transfer switch.
- Confirm the transfer switch rating against the pump motor’s full-load current before ordering a larger or smaller switch.
- If you are unsure which part fits your controller, email sales@kbsindustries.com with the controller model and the part number you need.
Order Eaton EPCT Fire Transfer Switch Components from KBS Industries
Order your Eaton EPCT Fire Transfer Switch Components from KBS Industries by emailing sales@kbsindustries.com with the Eaton part numbers you need and the quantity for each. We will confirm availability and pricing, and arrange delivery to your site. If a part you need is not listed here, tell us the number — we can often source other Eaton fire pump spares on request.
These Eaton EPCT Fire Transfer Switch Components sit alongside spares for the other Eaton fire pump controller ranges carried by KBS Industries. See our Eaton Fire Pump Control Spares hub page for the full list, and the neighbouring sections — Eaton EPCT Fire Components, Eaton LMR Plus Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton Freedom Series Components and Eaton A200 Series Components — for parts from the other electric controller families.
