Thursday, November 19, 2026

Eaton FDR Components

Eaton FDR Components: this page lists the 28 genuine Eaton parts that KBS Industries carries for Eaton FDR residential fire pump controllers, shown with their Eaton part numbers below.

These Eaton FDR Components are the parts that wear, fail or need replacing when FDR residential controllers are serviced. They cover the contactor, pushbuttons and circuit breakers, the surge arrestor and relay, the run period timer and pressure switch, the buzzer and the terminal blocks.

Use the Eaton part number below to match the component before you order: some breakers share a part number across different HP ratings, so match the HP as well. For the full Eaton fire pump range, start from our Eaton Fire Pump Control Spares hub page. For the other ranges, see Eaton FDAP/DFDAP Components, Eaton Overcurrent Protection Device, Eaton XTJL Components, Eaton Jockey Touch XTJP/XTJY Components, Eaton XTJP/XTJY Components, Eaton FDJP/FDJY Components, Eaton FD140 Components, Eaton FD120 Components, Eaton EPCT Fire Transfer Switch Components, Eaton EPCT Fire Components, Eaton LMR Plus Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton Freedom Series Components, Eaton Electric Common Components and Eaton A200 Series Components.

DescriptionEaton part no.DescriptionEaton part no.
Freedom Series IEC Contactor Up to 5HPCE15GNS3ABFreedom Series IEC Contactor Up to 10HPCE15KNS3AB
Auxillary ContactC320KGS3

Pushbutton

Pushbutton — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Illuminated Pushbutton10250T411HGreen Lens10250TC2N
Red Lens10250TC1N2 NC Contacts10250T3
1 NO Contact10250T53

Circuit breaker

Circuit breaker — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Breaker 0.5 HPQC2010Breaker 0.75 HPQC2015
Breaker 1.0 HPQC2015Breaker 1.5 HPQC2025
Breaker 2.0 HPQC2030Breaker 3.0 HPQC2040
Breaker 5.0 HPQC2050Breaker 7.5 HPQC2100
Breaker 10 HPQC2100Basic SwitchE47BMS43

Surge arrestor

Surge arrestor — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Surge ArrestorAG6503C3

Relay

Relay — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Relay 10ampD7PAARelay BaseD7PF2AA

Run period timer

Run period timer — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Run Period TimerTRL07

Pressure switch

Pressure switch — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Pressure Switch – ALCO 15-290 PSI3A13528H18

Buzzer

Buzzer — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Piezzo BuzzerMC-09-201-Q

Terminal block

Terminal block — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Terminal Block – 2.5mm102000Terminal Block – 6mm102020
Terminal Block – End Plate105000Terminal Block – Place Holder38536

What Are Eaton FDR Components?

Eaton FDR Components are the replacement parts for Eaton’s FDR residential fire pump controllers, the compact panels that run the small pumps protecting homes and small residential buildings. Each controller combines a contactor, a circuit breaker and a relay, with pushbuttons for starting and stopping, a pressure switch sensing system pressure, and a run period timer recording how long the pump has run. Because these residential controllers are widely installed, their spares cover the parts most often needed during servicing, from the breakers and contactors to the terminal blocks and buzzer.

In an Eaton FDR Components installation, the pressure switch watches system pressure and starts the pump when the pressure falls, then stops it when the pressure is restored. The circuit breaker protects the motor circuit, the contactor switches the motor, and the relay handles the control switching. The surge arrestor guards the controller against voltage surges, and the buzzer sounds when the panel needs attention.

The circuit breakers on this page are listed by motor horsepower, from 0.5 HP up to 10 HP, and two part numbers are shared: QC2015 covers both the 0.75 HP and the 1.0 HP breakers, and QC2100 covers both the 7.5 HP and the 10 HP breakers. Match the breaker by its HP rating as well as its part number, and when ordering Eaton FDR Components, check the part number on the failed component or on your controller’s parts list before you order.

Every one of these Eaton FDR Components is a genuine Eaton part, supplied with its Eaton part number. Genuine parts keep the controller’s ratings, connections and behaviour exactly as Eaton designed them, which matters in a residential fire pump application where the pump must start reliably when it is needed. For more background on Eaton’s fire pump range, see Eaton’s fire pump page.

How to Choose Eaton FDR Components

Match the part to your controller before you order. The checks below cover the most common mistakes when ordering Eaton FDR Components spares.

  • When ordering Eaton FDR Components, check the Eaton part number on the failed component or on your controller’s parts list — similar breakers, lenses and contacts are not interchangeable.
  • Match the circuit breaker by HP rating as well as part number: QC2015 covers the 0.75 HP and 1.0 HP breakers, and QC2100 covers the 7.5 HP and 10 HP breakers.
  • Match the contactor to the motor size: the Freedom Series IEC contactor comes in a 5HP version (CE15GNS3AB) and a 10HP version (CE15KNS3AB).
  • Order the pushbutton parts by their description: the illuminated pushbutton, the green and red lenses, and the NC and NO contacts are all different parts.
  • Match the terminal block by its size: the 2.5mm block is 102000, the 6mm block is 102020, the end plate is 105000 and the place holder is 38536.
  • Order the relay and its base together if both are worn: the 10amp relay is D7PAA and the relay base is D7PF2AA.
  • If you are unsure which part fits your controller, email sales@kbsindustries.com with the controller model and the part number you need.

Order Eaton FDR Components from KBS Industries

Order your Eaton FDR Components from KBS Industries by emailing sales@kbsindustries.com with the Eaton part numbers you need and the quantity for each. We will confirm availability and pricing, and arrange delivery to your site. If a part you need is not listed here, tell us the number — we can often source other Eaton fire pump spares on request.

These Eaton FDR Components sit alongside spares for the other Eaton fire pump controller ranges carried by KBS Industries. See our Eaton Fire Pump Control Spares hub page for the full list, and the neighbouring sections — Eaton FDAP/DFDAP Components, Eaton Overcurrent Protection Device, Eaton XTJL Components, Eaton Jockey Touch XTJP/XTJY Components, Eaton XTJP/XTJY Components, Eaton FDJP/FDJY Components, Eaton FD140 Components, Eaton FD120 Components, Eaton EPCT Fire Transfer Switch Components, Eaton EPCT Fire Components, Eaton LMR Plus Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton Freedom Series Components, Eaton Electric Common Components and Eaton A200 Series Components — for parts from the other controller families.