Eaton Transfer Switch Components
Eaton Transfer Switch Components: this page lists the 18 genuine Eaton parts that KBS Industries carries for Eaton transfer switches used with electric fire pump controllers, shown with their Eaton part numbers below.
These Eaton Transfer Switch Components are the parts that wear, fail or need replacing when a transfer switch is serviced. They cover the main display panel that shows the switch status, the transformer module that powers the controls, the relays, buzzer and pilot lights that signal and alarm, the fuses that protect the circuits, and the transfer switches themselves. A transfer switch moves the fire pump load between the normal supply and the emergency supply, so keeping its parts in working order matters when the normal supply fails.
Use the Eaton part number below to match the component to your transfer switch before you order, and check the voltage and language options carefully: transformer modules are made for particular supply voltages, and the microprocessor board comes in English, French and Spanish versions. For the full Eaton fire pump range, start from our Eaton Fire Pump Control Spares hub page. For the components shared across Eaton electric controllers, see Eaton Electric Common Components, and for the other electric ranges, see Eaton A200 Series Components, Eaton Freedom Series Components and Eaton XT Series Components.
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Microprocessor Board c/w Membrane – English | 6D32360G45 | Microprocessor Board c/w Membrane – French | 6D32360G46 |
| Microprocessor Board c/w Membrane – Spanish | 6D32360G44 |
Transformer module
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 208 / 240V | 4A58578G05 | 380V / 480V | 4A58578G06 |
| 400V | 4A58578G10 | 600V | 4A58578G07 |
Relay
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Relay (1CR) | MSAA276326 | Relay (2CR) | MSAA276396 |
Buzzer
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Panel Mount Buzzer – 120VAC, Continuous Output | MC-09-201-QR |
Pilot light
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 22mm Light Unit – Red (85-264VAC/DC Assembly – includes bulb) | M22-L-R-230R | Red Lens | 10250TC1N |
| 30mm Light Unit 120V (includes bulb) | 10250T181N |
Fuse and fuse holder
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Fuse Holder | 44-4360 | Fuse (1 Amp) | 44-4348 |
Transfer switch
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 300 Amp Transfer Switch | FATS3300NR | 400 Amp Transfer Switch | FATS3400CNR |
| 600 Amp Transfer Switch | FATS3600CNR |
What Are Eaton Transfer Switch Components?
Eaton Transfer Switch Components are the genuine Eaton replacement parts for the transfer switches fitted to Eaton electric fire pump controllers. The transfer switch is the device that changes the pump over from the normal power supply to the emergency supply when the normal supply fails, and back again when it returns. Its microprocessor board and membrane are the parts the operator sees and touches, so they are the first to wear.
The transformer module among these Eaton Transfer Switch Components steps the supply voltage down to the level the transfer switch controls need. Modules are made for particular supply voltages, from 208 volts to 600 volts, so the module must match the supply it is fitted to. A module made for the wrong voltage will not power the controls correctly.
The relays, buzzers, pilot lights and fuses among these Eaton Transfer Switch Components are the smaller parts that keep the transfer switch signalling and protected. The relays switch the control circuits, the buzzer sounds when the switch changes over, the pilot lights show the switch position, and the fuses protect the control wiring. They are small parts, but a failed pilot light or fuse can leave an operator unsure which supply the pump is running on.
Every part on this page is a genuine Eaton part, supplied with its Eaton part number. Eaton builds its fire pump controllers to the standards fire protection systems depend on, and using the maker’s own components keeps the controller’s ratings and approvals intact. For the manufacturer’s own fire pump control range, see Eaton fire pump controls.
How to Choose Eaton Transfer Switch Components
- Match the Eaton part number to your transfer switch model before you order. The numbers on this page are the surest way to identify the right Eaton Transfer Switch Components.
- Choose the microprocessor board in the language your operators need. The same board is listed in English, French and Spanish versions, and the part number is different for each.
- Match the transformer module to the supply voltage. Modules are listed for 208/240 volts, 380/480 volts, 400 volts and 600 volts, and the wrong module will not suit the supply.
- Check the relay position before you order. Relay 1CR and relay 2CR are different parts, so check which relay has failed before ordering a replacement.
- Match the pilot light to the fitting and the voltage. The 22mm light unit and the 30mm light unit are different sizes, and the 30mm unit is made for 120 volts.
- Check the fuse rating. The fuse listed here is a 1 amp fuse, and it must be fitted with the matching fuse holder.
- Not sure which part fits your transfer switch? Email sales@kbsindustries.com with the transfer switch model and rating, the supply voltage and the part you need.
Order Eaton Transfer Switch Components from KBS Industries
To order Eaton Transfer Switch Components, email sales@kbsindustries.com with the Eaton part numbers you need and the quantity for each. KBS Industries will confirm availability and delivery for your order.
For related Eaton parts, see Eaton Electric Common Components, Eaton A200 Series Components, Eaton Freedom Series Components and Eaton XT Series Components, and for the whole fire pump control range, return to the Eaton Fire Pump Control Spares hub page.
