Eaton LMR Plus Components: this page lists the 21 genuine Eaton parts that KBS Industries carries for Eaton LMR Plus electric fire pump controllers, shown with their Eaton part numbers below. One further row shows a part that has been superseded, with its replacement listed below the old number.
These Eaton LMR Plus Components are the parts that wear, fail or need replacing when LMR Plus controllers are serviced. They cover the pushbuttons, membranes and microprocessor assembly, the input and output boards, the relays and cables, the pressure sensor, and the drain valve, transformer and buzzer.
Auxilliary Relay Board (Includes two PCB Output Relays)
99-5836-01
Data and communication cable
Description
Eaton part no.
Description
Eaton part no.
Data Cable – Logic Board to Input / Output Board
4A55723H01
Power Cable – Logic Board to Input / Output Board
4A55723H02
Relay
Description
Eaton part no.
Description
Eaton part no.
PCB Output Relays
3A18033H09
Relay – 600V Rated
4A55517H01
Pressure sensor
Description
Eaton part no.
Description
Eaton part no.
4-20mA Pressure Sensor
CE16518H01
4-20mA Pressure Sensor
4A55678H01 (Obsolete) Latest: CE16518H01
Drain valve solenoid
Drain Valve 12-24VDC
Description
Eaton part no.
Description
Eaton part no.
1/2″ Drain Valve Assemblies
CE16519G03
Transformer
Description
Eaton part no.
Description
Eaton part no.
Transformer – 380 / 480 / 600 Volt Primary
4A55513H01
Cable assembly
Description
Eaton part no.
Description
Eaton part no.
Cable Mechanism – Single
F1S03C
Cable Mechanism – Double
F1S03CD
Buzzer
Description
Eaton part no.
Description
Eaton part no.
Panel Mount Buzzer – 24VDC, Continuous Output
MC-07-130-SR
What Are Eaton LMR Plus Components?
Eaton LMR Plus Components are the replacement parts for Eaton’s LMR Plus fire pump controllers, the microprocessor-based panels used on electric fire pump installations. Each controller combines a logic controller board, an input/output board, operator pushbuttons, a membrane keypad and a pressure sensor, all working together to start the pump on demand and keep it running until the system pressure is restored. Because the LMR Plus is a widely installed controller, its spares cover the parts most often needed during servicing, from the logic board and relay board to the drain valve solenoid and transformer.
In an Eaton LMR Plus Components installation, the controller reads system pressure through its 4-20mA pressure sensor and uses that signal to decide when to start and stop the pump. The logic controller board processes the signal, drives the outputs through the input/output board, and shows status and alarms on the membrane display. Pushbuttons give the operator manual start and stop control, while the auxiliary relay board adds extra output contacts for alarms and remote signals. Data and power cables link the boards, and the panel-mount buzzer sounds when an alarm condition occurs.
One part on this page has been superseded. The 4-20mA pressure sensor originally supplied as 4A55678H01 is now obsolete, and Eaton’s current replacement is CE16518H01, which is also listed here as the current part. If your controller still carries the older sensor, order CE16518H01: it is the direct replacement and the number to use going forward. The obsolete number is kept on the page so that anyone matching an old parts list or an existing installation can find the right current part without guessing.
Every one of these Eaton LMR Plus Components is a genuine Eaton part, supplied with its Eaton part number. Genuine parts keep the controller’s ratings, connections and behaviour exactly as Eaton designed them, which matters in a fire pump application where the controller must start the pump first time, every time. For more background on Eaton’s fire pump range, see Eaton’s fire pump page.
How to Choose Eaton LMR Plus Components
Match the part to your controller before you order. The checks below cover the most common mistakes when ordering Eaton LMR Plus Components spares.
Check the Eaton part number on the failed component or on your controller’s parts list — similar boards and sensors are not interchangeable.
Match the pushbutton style: the 10250T operators and the M22 operators fit different mounting arrangements.
Confirm whether your controller has the COM option before ordering a logic controller board — the standard board is 99-5835-12 and the COM option board is 99-5835-02.
Order the input/output board by its full number: 4A55149H02 and 99-5835-01 are different boards.
For the pressure sensor, order CE16518H01 — the older 4A55678H01 is obsolete and CE16518H01 is the current replacement.
Check the drain valve voltage: the assembly listed here is the 12-24VDC version, CE16519G03.
If you are unsure which part fits your controller, email sales@kbsindustries.com with the controller model and the part number you need.
Order Eaton LMR Plus Components from KBS Industries
Order your Eaton LMR Plus Components from KBS Industries by emailing sales@kbsindustries.com with the Eaton part numbers you need and the quantity for each. We will confirm availability and pricing, and arrange delivery to your site. If a part you need is not listed here, tell us the number — we can often source other Eaton fire pump spares on request.