Thursday, November 19, 2026

Eaton EPCT Fire Components

Eaton EPCT Fire Components: this page lists the 13 genuine Eaton parts that KBS Industries carries for Eaton EPCT Fire fire pump controllers. Every part is shown with its description and its Eaton part number, so you can match the component in your controller and order with confidence.

These Eaton EPCT Fire Components are the parts that wear, fail or need replacing when EPCT Fire controllers are serviced — from the touchscreen display board and the input/output board to the option boards, the pressure sensor and the drain valve solenoid. Each one is a genuine Eaton part, supplied exactly as Eaton lists it for the EPCT Fire range.

Use the Eaton part number below to match the component to your controller before you order, and check the variant label where one is shown. See the Eaton Fire Pump Control Spares hub page for the full list of Eaton spares, and for the other electric ranges, see Eaton Electric Common Components, Eaton A200 Series Components, Eaton Freedom Series Components, Eaton XT Series Components, Eaton Transfer Switch Components and Eaton LMR Plus Components.

DescriptionEaton part no.DescriptionEaton part no.
Operator Green Start PB + 1 N.O. Contact BlockM22-XD-G-X1 + C22-D-X-K10Operator Red Stop PB + 1 N.O. Contact BlockM22-XDH-R-X0 + C22-D-X-K10

Display board

Display board — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Touchscreen Display BoardCE16260H01

Power i/o board

Power i/o board — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Input / Output BoardCE16260H02

Option boards

Option boards — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Relay Board (Includes four (4) One Form-C relays)CE16290H01MODBUS Communications CardCE16290H02
Secondary 4-20mA Device BoardCE16290H03Built-in Alarm CardCE16290H04

Power and communications cable

Power and communications cable — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Power and Communications Cable – Display Board to I/O BoardCE16260H04

Relay

Relay — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Relay – 600V Rated4A55517H01

Pressure sensor

Pressure sensor — no picture available
DescriptionEaton part no.DescriptionEaton part no.
4-20mA Pressure SensorCE16518H01

Drain valve solenoid

Drain valve solenoid — no picture available

Drain Valve 12-24VDC

DescriptionEaton part no.DescriptionEaton part no.
Internally mountedCE16519G03Externally mountedCE16519H01

What Are Eaton EPCT Fire Components?

Eaton EPCT Fire Components are the replacement parts for Eaton’s EPCT Fire fire pump controllers, the microprocessor-based panels used on electric fire pump installations. The controller combines a touchscreen display board, an input/output board and a set of plug-in option boards, all working together to start the pump on demand and keep it running until the system pressure is restored. Because the EPCT Fire is a widely installed controller, its spares cover the parts most often needed during servicing, from the display and I/O boards to the relay, pressure sensor and drain valve solenoid.

In an Eaton EPCT Fire Components installation, the controller reads system pressure through its 4-20mA pressure sensor and uses that signal to decide when to start and stop the pump. The input/output board drives the pump outputs, the touchscreen display board shows status and alarms, and the option boards add extra relays, MODBUS communications, a secondary 4-20mA device connection or a built-in alarm card. Pushbuttons give the operator manual start and stop control, and the power and communications cable links the display board to the I/O board.

The drain valve solenoid on this page is listed in two mounting versions under the 12-24VDC variant: internally mounted and externally mounted. Check which mounting your controller uses before you order, because the two assemblies carry different part numbers. The internally mounted version is CE16519G03 and the externally mounted version is CE16519H01.

Every one of these Eaton EPCT Fire Components is a genuine Eaton part, supplied with its Eaton part number. Genuine parts keep the controller’s ratings, connections and behaviour exactly as Eaton designed them, which matters in a fire pump application where the controller must start the pump first time, every time. For more background on Eaton’s fire pump range, see Eaton’s fire pump page.

How to Choose Eaton EPCT Fire Components

Match the part to your controller before you order. The checks below cover the most common mistakes when ordering Eaton EPCT Fire Components spares.

  • Check the Eaton part number on the failed component or on your controller’s parts list — similar boards and sensors are not interchangeable.
  • Match the pushbutton operators: the green start operator is M22-XD-G-X1 + C22-D-X-K10 and the red stop operator is M22-XDH-R-X0 + C22-D-X-K10.
  • Confirm which option board you need before ordering — the relay board, MODBUS communications card, secondary 4-20mA device board and built-in alarm card are four different boards.
  • Order the display board and the I/O board by their full numbers: the touchscreen display board is CE16260H01 and the input/output board is CE16260H02.
  • Check the drain valve mounting: the internally mounted assembly is CE16519G03 and the externally mounted assembly is CE16519H01.
  • For the pressure sensor, order CE16518H01 — the same 4-20mA sensor used across the Eaton LMR Plus and EPCT Fire ranges.
  • If you are unsure which part fits your controller, email sales@kbsindustries.com with the controller model and the part number you need.

Order Eaton EPCT Fire Components from KBS Industries

Order your Eaton EPCT Fire Components from KBS Industries by emailing sales@kbsindustries.com with the Eaton part numbers you need and the quantity for each. We will confirm availability and pricing, and arrange delivery to your site. If a part you need is not listed here, tell us the number — we can often source other Eaton fire pump spares on request.

These Eaton EPCT Fire Components sit alongside spares for the other Eaton fire pump controller ranges carried by KBS Industries. See our Eaton Fire Pump Control Spares hub page for the full list, and the neighbouring sections — Eaton LMR Plus Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton Freedom Series Components and Eaton A200 Series Components — for parts from the other electric controller families.