Eaton FD140 Components
Eaton FD140 Components: this page lists the 13 genuine Eaton parts that KBS Industries carries for Eaton FD140 diesel fire pump controllers, shown with their Eaton part numbers below.
These Eaton FD140 Components are the parts that wear, fail or need replacing when FD140 controllers are serviced. They cover the battery charger, pushbuttons and main display board, the power I/O board, the pressure sensor, and the drain valve, isolating diode pack and buzzer.
Use the Eaton part number below to match the component to your controller before you order, and check the part carefully: some descriptions look alike but carry different part numbers. For the full Eaton fire pump range, start from our Eaton Fire Pump Control Spares hub page. For the components shared across Eaton diesel controllers, see Eaton FD120 Components, and for the electric ranges, see Eaton Electric Common Components, Eaton A200 Series Components, Eaton Freedom Series Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton LMR Plus Components, Eaton EPCT Fire Components and Eaton EPCT Fire Transfer Switch Components.
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Battery Charger – 100 / 240VAC – 12 / 24VDC | 4A55505H01 |
Pushbutton
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Crank #1 or #2 and Contact Block | M22-D-S-K10 | Stop and Contact Block | M22-DH-R-K10 |
| 3 Position Switch & Contact Block (Man-Off-Auto) | M22-WRK3-K20 |
Main display board
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Main Display Board | CE16600H01 |
Power i/o board
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Power I/O Board | CE16600H02 | Engine Board Relay – 24Vdc | 1432826-1 |
Pressure sensor
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Pressure Sensor 4-20mA | CE16518H01 |
Buzzer
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Panel Mount Buzzer – 24VDC, Continuous Output | MC-07-130-SR |
Isolating diode pack
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 15 Amps | 3A13987H15 |
Drain valve solenoid
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Drain Valve 12-24 VDC | CE16519H01 |
Miscellaneous
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| Main Door Handle | 349P236G01 | Breakable Glass Cover Assembly for Man-Off-Auto | 47-51668 |
What Are Eaton FD140 Components?
Eaton FD140 Components are the replacement parts for Eaton’s FD140 diesel fire pump controllers, the microprocessor-based panels used on diesel engine-driven fire pump installations. Each controller combines a main display board and a power I/O board, with a battery charger keeping the engine batteries ready, pushbuttons for manual control, and a pressure sensor that starts the engine on demand. Because the FD140 is a widely installed controller, its spares cover the parts most often needed during servicing, from the boards and charger to the pushbuttons and drain valve solenoid.
In an Eaton FD140 Components installation, the controller reads system pressure through its 4-20mA pressure sensor and uses that signal to decide when to crank the engine. The main display board shows status and alarms, and the power I/O board drives the outputs. The battery charger keeps the starting batteries charged, the isolating diode pack separates the battery circuits, and the panel-mount buzzer sounds when an alarm condition occurs.
The drain valve solenoid on this page is the 12-24 VDC version, CE16519H01. Check the voltage and mounting your controller uses before you order, because the drain valve assemblies for different controllers carry different part numbers. The battery charger listed here is the 100 / 240VAC input, 12 / 24VDC output charger, 4A55505H01 — the same charger used on the FD120 range.
Every one of these Eaton FD140 Components is a genuine Eaton part, supplied with its Eaton part number. Genuine parts keep the controller’s ratings, connections and behaviour exactly as Eaton designed them, which matters in a fire pump application where the controller must start the engine first time, every time. For more background on Eaton’s fire pump range, see Eaton’s fire pump page.
How to Choose Eaton FD140 Components
Match the part to your controller before you order. The checks below cover the most common mistakes when ordering Eaton FD140 Components spares.
- Check the Eaton part number on the failed component or on your controller’s parts list — similar boards and sensors are not interchangeable.
- Match the pushbutton style: the FD140 pushbuttons are the M22 operators — crank is M22-D-S-K10, stop is M22-DH-R-K10 and the three-position switch is M22-WRK3-K20.
- Order the display board and the I/O board by their full numbers: the main display board is CE16600H01 and the power I/O board is CE16600H02.
- Check the battery charger rating: the charger listed here is the 100 / 240VAC input, 12 / 24VDC output version, 4A55505H01.
- For the pressure sensor, order CE16518H01 — the same 4-20mA sensor used across the Eaton FD120, FD140, LMR Plus and EPCT Fire ranges.
- Check the drain valve voltage: the assembly listed here is the 12-24 VDC version, CE16519H01.
- If you are unsure which part fits your controller, email sales@kbsindustries.com with the controller model and the part number you need.
Order Eaton FD140 Components from KBS Industries
Order your Eaton FD140 Components from KBS Industries by emailing sales@kbsindustries.com with the Eaton part numbers you need and the quantity for each. We will confirm availability and pricing, and arrange delivery to your site. If a part you need is not listed here, tell us the number — we can often source other Eaton fire pump spares on request.
These Eaton FD140 Components sit alongside spares for the other Eaton fire pump controller ranges carried by KBS Industries. See our Eaton Fire Pump Control Spares hub page for the full list, and the neighbouring sections — Eaton FD120 Components, Eaton EPCT Fire Transfer Switch Components, Eaton EPCT Fire Components, Eaton LMR Plus Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton Freedom Series Components and Eaton A200 Series Components — for parts from the other controller families.

