Thursday, November 19, 2026

Eaton FDJP/FDJY Components

Eaton FDJP/FDJY Components: this page lists the 49 genuine Eaton parts that KBS Industries carries for Eaton FDJP/FDJY jockey fire pump controllers, shown with their Eaton part numbers below.

These Eaton FDJP/FDJY Components are the parts that wear, fail or need replacing when FDJP and FDJY jockey controllers are serviced. They cover the circuit breakers, contactors and overloads, the control transformers, the pressure switch, and the selector switch and miscellaneous parts.

Use the Eaton part number below to match the component before you order, and check the part carefully: some descriptions look alike but carry different part numbers, and the overloads are listed by frame and current range, so match both to the contactor. For the full Eaton fire pump range, start from our Eaton Fire Pump Control Spares hub page. For the diesel ranges, see Eaton FD120 Components and Eaton FD140 Components, and for the electric ranges, see Eaton Electric Common Components, Eaton A200 Series Components, Eaton Freedom Series Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton LMR Plus Components, Eaton EPCT Fire Components and Eaton EPCT Fire Transfer Switch Components.

DescriptionEaton part no.DescriptionEaton part no.
3A HMCP003A0C3A16272G717A HMCP007C0C3A16272G72
15A HMCP015E0C3A16272G7330A HMCP030H1C3A16272G74
50A HMCP050K2C3A16272G75100A HMCP100R3C3A16272G76

Contactor

Contactor — no picture available
DescriptionEaton part no.DescriptionEaton part no.
B Frame Contactor XTCE015B10AMSAA290055C Frame Contactor XTCE032C01AMSAA277289
D Frame Contactor XTCE065D00AMSAA277891

B frame overload

B frame overload — no picture available
DescriptionEaton part no.DescriptionEaton part no.
0.1 – 0.16A XTOBP16BC1MSAA2784310.16 – 0.24 A XTOBP24BC1MSAA278432
0.24 – 0.4 A XTOBP40BC1MSAA2784330.4 – 0.6A XTOBP60BC1MSAA278434
0.6 – 1.0A XTOB001BC1MSAA2784351.0 – 1.6A XTOB1P6BC1MSAA278436
1.6 – 2.4A XTOB2P4BC1MSAA2784372.4 – 4.0A XTOB004BC1MSAA278438
4.0 – 6.0 A XTOB006BC1MSAA2784396.0 – 10.0A XTOB010BC1MSAA278440
9.0 – 12.0A XTOB012BC1MSAA27844112.0 – 16.0 A XTOB016BC1MSAA290168

C frame overload

C frame overload — no picture available
DescriptionEaton part no.DescriptionEaton part no.
0.1 – 0.16A XTOBP16CC1MSAA2784420.16 – 0.24A XTOBP24CC1MSAA278443
0.24 – 0.4 A XTOBP40CC1MSAA2784440.4 – 0.6A XTOBP60CC1MSAA278445
0.6 – 1.0A XTOB001CC1MSAA2784461.0 – 1.6A XTOB1P6CC1MSAA278447
1.6 – 2.4A XTOB2P4CC1MSAA2784482.4 – 4.0A XTOB004CC1MSAA278449
4.0 – 6.0A XTOB006CC1MSAA2784506.0 – 10.0A XTOB010CC1MSAA278451
9.0 – 12.0A XTOB012CC1MSAA27845112.0 – 16.0A XTOB016CC1MSAA278452

D frame overload

D frame overload — no picture available
DescriptionEaton part no.DescriptionEaton part no.
6.0 – 10.0 A XTOB010DC1MSAA27845510.0 – 16.0A XTOB016DC1MSAA278456
16.0 – 24.0 A XTOB024DC1MSAA27845724.0 – 40.0 A XTOB040DC1MSAA278458
40.0 – 57.0A XTOB057DC1MSAA27845950.0 – 65.0A XTOB065DC1MSAA278460

Transformer

Transformer — no picture available
DescriptionEaton part no.DescriptionEaton part no.
208V 60Hz / 120V (50 VA)3A13371H01240V 60Hz / 120V (50 VA)3A13371H02
380V 50Hz / 120V (50 VA)CS50GFK50480V 60Hz / 120V (50 VA)3A13371H04
600V 60Hz / 120V (50 VA)3A13371H05

Pressure switch

Pressure switch — no picture available
DescriptionEaton part no.DescriptionEaton part no.
ALCO 15-290 PSI3A13528H18

Selector switch

Selector switch — no picture available
DescriptionEaton part no.DescriptionEaton part no.
3 Position Hand-Off-Auto Selector Switch & Contact Block10250T1323 + 10250T2

Miscellaneous

Miscellaneous — no picture available
DescriptionEaton part no.DescriptionEaton part no.
O/L Reset Push Button53-2117-3O/L Reset Extension53-2456
0.6A Fuse7076A68H02

What Are Eaton FDJP/FDJY Components?

Eaton FDJP/FDJY Components are the replacement parts for Eaton’s FDJP and FDJY jockey pump controllers, the compact panels that run the small jockey pump which keeps the fire protection system pressurised between main pump runs. Each controller combines a circuit breaker, a contactor and an overload relay, with a control transformer supplying the control circuit, a pressure switch sensing system pressure, and a Hand-Off-Auto selector switch for manual control. Because the FDJP and FDJY are widely installed jockey controllers, their spares cover the parts most often needed during servicing, from the breakers and contactors to the overloads and transformers.

In an Eaton FDJP/FDJY Components installation, the pressure switch watches system pressure and starts the jockey pump when the pressure falls, then stops it when the pressure is restored. The circuit breaker protects the motor circuit, the contactor switches the motor, and the overload relay trips the motor out if it draws too much current. The control transformer steps the supply voltage down for the control circuit, and the overload reset push button lets the operator reset the overload after a trip.

The overloads on this page are listed in three frame groups — B frame, C frame and D frame — each with its own current ranges. Match the overload to the contactor frame in your Eaton FDJP/FDJY Components controller, then to the motor’s full-load current: an overload for the wrong frame will not fit, and one for the wrong current range will not protect the motor. Note that part number MSAA278451 is listed twice in the C frame overload group, for the 6.0-10.0A and 9.0-12.0A ranges, because the catalog lists it that way.

Every one of these Eaton FDJP/FDJY Components is a genuine Eaton part, supplied with its Eaton part number. Genuine parts keep the controller’s ratings, connections and behaviour exactly as Eaton designed them, which matters in a fire pump application where the jockey pump must hold system pressure day after day. For more background on Eaton’s fire pump range, see Eaton’s fire pump page.

How to Choose Eaton FDJP/FDJY Components

Match the part to your controller before you order. The checks below cover the most common mistakes when ordering Eaton FDJP/FDJY Components spares.

  • When ordering Eaton FDJP/FDJY Components, check the Eaton part number on the failed component or on your controller’s parts list — similar breakers, contactors and overloads are not interchangeable.
  • Match the overload to the contactor frame first — B frame, C frame or D frame — then to the motor’s full-load current.
  • Order the circuit breaker by its amp rating: the 3A, 7A, 15A, 30A, 50A and 100A HMCP breakers are different parts.
  • Match the transformer to your site supply voltage: the 208V, 240V, 380V, 480V and 600V transformers carry different part numbers.
  • Check the pressure switch range: the switch listed here is the ALCO 15-290 PSI switch, 3A13528H18.
  • For the overload reset parts, order the push button 53-2117-3 and the extension 53-2456 separately — they are two different parts.
  • If you are unsure which part fits your controller, email sales@kbsindustries.com with the controller model and the part number you need.

Order Eaton FDJP/FDJY Components from KBS Industries

Order your Eaton FDJP/FDJY Components from KBS Industries by emailing sales@kbsindustries.com with the Eaton part numbers you need and the quantity for each. We will confirm availability and pricing, and arrange delivery to your site. If a part you need is not listed here, tell us the number — we can often source other Eaton fire pump spares on request.

These Eaton FDJP/FDJY Components sit alongside spares for the other Eaton fire pump controller ranges carried by KBS Industries. See our Eaton Fire Pump Control Spares hub page for the full list, and the neighbouring sections — Eaton FD140 Components, Eaton FD120 Components, Eaton EPCT Fire Transfer Switch Components, Eaton EPCT Fire Components, Eaton LMR Plus Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton Freedom Series Components and Eaton A200 Series Components — for parts from the other controller families.