Eaton XTJL Components
Eaton XTJL Components: this page lists the 38 genuine Eaton parts that KBS Industries carries for Eaton XTJL jockey fire pump controllers, shown with their Eaton part numbers below.
These Eaton XTJL Components are the parts that wear, fail or need replacing when XTJL jockey controllers are serviced. They cover the motor circuit protectors, circuit breakers and contactors, the control transformers, the pressure switch and the miscellaneous parts.
Use the Eaton part number below to match the component before you order, and check the part carefully: some descriptions look alike but carry different part numbers. For the full Eaton fire pump range, start from our Eaton Fire Pump Control Spares hub page. For the jockey ranges, see Eaton Jockey Touch XTJP/XTJY Components, Eaton XTJP/XTJY Components, Eaton FDJP/FDJY Components, Eaton FD120 Components and Eaton FD140 Components, and for the electric ranges, see Eaton Electric Common Components, Eaton A200 Series Components, Eaton Freedom Series Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton LMR Plus Components, Eaton EPCT Fire Components and Eaton EPCT Fire Transfer Switch Components.
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 0.63 – 1.0 XTA291960 / XTPR001BC1 | MSAA265335 | 1.0 – 1.6 XTA291968 / XTPR1P6BC1 | MSAA265336 |
| 1.6 – 2.5 XTA291969 / XTPR2P5BC1 | MSAA265337 | 2.5 – 4.0 XTA291961 / XTPR004BC1 | MSAA265338 |
| 4.0 – 6.3 XTA291970 / XTPR6P3BC1 | MSAA265339 | 6.3 – 10 XTA291962 / XTPR010BC1 | MSAA265340 |
| 8.0 – 12 XTA291963 / XTPR012BC1 | MSAA156397 | 10 – 16 XTA291964 / XTPR016BC1 | MSAA265342 |
| 16 – 20 XTA291965 / XTPR020BC1 | MSAA265343 | 20 – 25 XTA291966 / XTPR025BC1 | MSAA265344 |
| 25 – 32 XTA291967 / XTPR032BC1 | MSAA156398 |
Circuit breaker
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 50 HMCP050K2C | 3A16272G75 | 100 HMCP100R3C | 3A16272G76 |
| 150 – | HMCP150T4C |
Contactor
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| B-Frame Contactor – 120VAC Coil XTCE007B10A | MSAA276547 | B-Frame Contactor – 120VAC Coil XTCE009B10A | MSAA276687 |
| B-Frame Contactor – 120VAC Coil XTCE012B10A | MSAA276827 | B-Frame Contactor – 120VAC Coil XTCE015B01 | MSAA290090 |
| B-Frame Contactor – 120VAC Coil XTCE015B10A | MSAA290055 | C-Frame Contactor – 120VAC Coil XTCE018C01A | MSAA277033 |
| C-Frame Contactor – 120VAC Coil XTCE018C10A | MSAA277001 | C-Frame Contactor – 120VAC Coil XTCE025C01A | MSAA277161 |
| C-Frame Contactor – 120VAC Coil XTCE025C10A | MSAA277129 | C-Frame Contactor – 120VAC Coil XTCE032C01A | MSAA277289 |
| C-Frame Contactor – 120VAC Coil XTCE032C10A | MSAA277257 | D-Frame Contactor – 120VAC Coil XTCE040D00A | MSAA277763 |
| D-Frame Contactor – 120VAC Coil XTCE050D00A | MSAA277827 | D-Frame Contactor – 120VAC Coil XTCE065D00A | MSAA277891 |
Transformer
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 208V 60Hz / 120V (50 VA) | 3A13371H01 | 240V 60Hz / 120V (50 VA) | 3A13371H02 |
| 380V 50Hz / 120V (50 VA) | CS50GFK50 | 480V 60Hz / 120V (50 VA) | 3A13371H04 |
| 600V 60Hz / 120V (50 VA) | 3A13371H05 |
Pressure switch
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| ALCO 15-290PSI Pressure Switch | 3A13528H18 |
Miscellaneous
| Description | Eaton part no. | Description | Eaton part no. |
|---|---|---|---|
| 3 Position Hand-Off-Auto Selector Switch & Contact Block | M22-WRK3-K20 | Rotary Disconnect | MSAA106132 |
| Line Side Adapter | MSAA262518 | 0.6A Control Fuse | 7076A68H02 |
What Are Eaton XTJL Components?
Eaton XTJL Components are the replacement parts for Eaton’s XTJL jockey pump controllers, the compact panels that run the small jockey pump which keeps the fire protection system pressurised between main pump runs. Each controller combines a motor circuit protector, a circuit breaker and a contactor, with a control transformer supplying the control circuit and an ALCO pressure switch sensing system pressure. Because the XTJL is a widely installed jockey controller, its spares cover the parts most often needed during servicing, from the protectors and contactors to the transformers and fuses.
In an Eaton XTJL Components installation, the pressure switch watches system pressure and starts the jockey pump when the pressure falls, then stops it when the pressure is restored. The motor circuit protector guards the motor against overload and short circuit, the circuit breaker protects the motor circuit, and the contactor switches the motor. The control transformer steps the supply voltage down for the control circuit, and the control fuse protects the control wiring.
The motor circuit protectors on this page are listed by current range, from 0.63-1.0A up to 25-32A, each with its own part number. Match the protector to the motor’s full-load current: a protector for the wrong range will not protect the motor. The contactors are likewise listed by frame — B frame, C frame and D frame — with 120VAC coils throughout, so match the frame and the coil voltage to the contactor in your Eaton XTJL Components controller.
Every one of these Eaton XTJL Components is a genuine Eaton part, supplied with its Eaton part number. Genuine parts keep the controller’s ratings, connections and behaviour exactly as Eaton designed them, which matters in a fire pump application where the jockey pump must hold system pressure day after day. For more background on Eaton’s fire pump range, see Eaton’s fire pump page.
How to Choose Eaton XTJL Components
Match the part to your controller before you order. The checks below cover the most common mistakes when ordering Eaton XTJL Components spares.
- When ordering Eaton XTJL Components, check the Eaton part number on the failed component or on your controller’s parts list — similar protectors, breakers and contactors are not interchangeable.
- Match the motor circuit protector to the motor’s full-load current: the protectors run from 0.63-1.0A up to 25-32A.
- Match the contactor to its frame — B frame, C frame or D frame — and check the coil: every contactor listed here has a 120VAC coil.
- Order the circuit breaker by its amp rating: the 50A, 100A and 150A HMCP breakers are different parts.
- Match the transformer to your site supply voltage: the 208V, 240V, 380V, 480V and 600V transformers carry different part numbers.
- Order the pressure switch by its description: the ALCO 15-290PSI pressure switch on this page is 3A13528H18.
- If you are unsure which part fits your controller, email sales@kbsindustries.com with the controller model and the part number you need.
Order Eaton XTJL Components from KBS Industries
Order your Eaton XTJL Components from KBS Industries by emailing sales@kbsindustries.com with the Eaton part numbers you need and the quantity for each. We will confirm availability and pricing, and arrange delivery to your site. If a part you need is not listed here, tell us the number — we can often source other Eaton fire pump spares on request.
These Eaton XTJL Components sit alongside spares for the other Eaton fire pump controller ranges carried by KBS Industries. See our Eaton Fire Pump Control Spares hub page for the full list, and the neighbouring sections — Eaton Jockey Touch XTJP/XTJY Components, Eaton XTJP/XTJY Components, Eaton FDJP/FDJY Components, Eaton FD140 Components, Eaton FD120 Components, Eaton EPCT Fire Transfer Switch Components, Eaton EPCT Fire Components, Eaton LMR Plus Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton Freedom Series Components and Eaton A200 Series Components — for parts from the other controller families.
