Thursday, November 19, 2026

Eaton FDAP/DFDAP Components

Eaton FDAP/DFDAP Components: this page lists the 3 genuine Eaton parts that KBS Industries carries for Eaton FDAP and DFDAP alarm panels, shown with their Eaton part numbers below.

These Eaton FDAP/DFDAP Components are the parts that wear, fail or need replacing when FDAP and DFDAP alarm panels are serviced. They cover the main board and the two membranes — one for the diesel DFDAP panel and one for the electric FDAP panel.

Use the Eaton part number below to match the component before you order, and check the part carefully: the two membranes look alike but carry different part numbers. For the full Eaton fire pump range, start from our Eaton Fire Pump Control Spares hub page. For the other ranges, see Eaton Overcurrent Protection Device, Eaton XTJL Components, Eaton Jockey Touch XTJP/XTJY Components, Eaton XTJP/XTJY Components, Eaton FDJP/FDJY Components, Eaton FD140 Components, Eaton FD120 Components, Eaton EPCT Fire Transfer Switch Components, Eaton EPCT Fire Components, Eaton LMR Plus Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton Freedom Series Components, Eaton Electric Common Components and Eaton A200 Series Components.

DescriptionEaton part no.DescriptionEaton part no.
Main Board70C1689G01

Membrane

Membrane — no picture available
Membrane — no picture available
DescriptionEaton part no.DescriptionEaton part no.
Diesel (DFDAP)99-5815-01Electric (FDAP)99-5814-01

What Are Eaton FDAP/DFDAP Components?

Eaton FDAP/DFDAP Components are the replacement parts for Eaton’s FDAP and DFDAP alarm panels, the panels that announce fire pump alarms in a building. The FDAP panel serves electric fire pump controllers and the DFDAP panel serves diesel fire pump controllers. Each panel is built around a main board with a membrane keypad, and the spares on this page cover the parts most often needed during servicing: the main board and the two membranes.

In an Eaton FDAP/DFDAP Components installation, the alarm panel sits where the fire pump system is monitored, sounding and showing alarms for pump running, pump failure and other controller conditions. The main board drives the panel’s alarms and indications, while the membrane is the keypad and display face the operator sees and presses. A damaged membrane or a failed main board will silence or confuse the panel’s alarms, so both parts are worth replacing promptly.

The two membranes on this page are not interchangeable: the diesel DFDAP membrane is 99-5815-01 and the electric FDAP membrane is 99-5814-01. Match the membrane to your panel — a DFDAP membrane in an FDAP panel, or the other way around, will not fit or work correctly. When ordering Eaton FDAP/DFDAP Components, check the part number on the failed part or on your panel’s parts list before you order.

Every one of these Eaton FDAP/DFDAP Components is a genuine Eaton part, supplied with its Eaton part number. Genuine parts keep the panel’s ratings, connections and behaviour exactly as Eaton designed them, which matters in a fire alarm application where the panel must announce a fault the moment it happens. For more background on Eaton’s fire pump range, see Eaton’s fire pump page.

How to Choose Eaton FDAP/DFDAP Components

Match the part to your panel before you order. The checks below cover the most common mistakes when ordering Eaton FDAP/DFDAP Components spares.

  • When ordering Eaton FDAP/DFDAP Components, check the Eaton part number on the failed part or on your panel’s parts list — the two membranes look alike but are different parts.
  • Match the membrane to the panel type: the diesel DFDAP membrane is 99-5815-01 and the electric FDAP membrane is 99-5814-01.
  • Order the main board by its part number: the FDAP/DFDAP main board is 70C1689G01.
  • If the membrane is damaged or the keys no longer respond, replace the membrane rather than the whole panel.
  • If the panel does not alarm at all, check the main board and its connections before ordering a replacement.
  • Keep the panel’s model and serial number handy when you order, so the part can be matched to your panel.
  • If you are unsure which part fits your panel, email sales@kbsindustries.com with the panel model and the part number you need.

Order Eaton FDAP/DFDAP Components from KBS Industries

Order your Eaton FDAP/DFDAP Components from KBS Industries by emailing sales@kbsindustries.com with the Eaton part numbers you need and the quantity for each. We will confirm availability and pricing, and arrange delivery to your site. If a part you need is not listed here, tell us the number — we can often source other Eaton fire pump spares on request.

These Eaton FDAP/DFDAP Components sit alongside spares for the other Eaton fire pump controller ranges carried by KBS Industries. See our Eaton Fire Pump Control Spares hub page for the full list, and the neighbouring sections — Eaton Overcurrent Protection Device, Eaton XTJL Components, Eaton Jockey Touch XTJP/XTJY Components, Eaton XTJP/XTJY Components, Eaton FDJP/FDJY Components, Eaton FD140 Components, Eaton FD120 Components, Eaton EPCT Fire Transfer Switch Components, Eaton EPCT Fire Components, Eaton LMR Plus Components, Eaton XT Series Components, Eaton Transfer Switch Components, Eaton Freedom Series Components, Eaton Electric Common Components and Eaton A200 Series Components — for parts from the other controller families.